Flexible cable 2-NORM TRAY-CY TC-ER MTW UL/CSA manufactured by the company TKD kabel (TKD cable) It acts as a control and power cable for connecting various types of equipment and machines. It is laid permanently in channels, it is able to withstand medium levels of mechanical loads and bends without the effect of stretching and forced actions. Protected from electromagnetic interference (shielded).
The material of the insulating layers of the cores and the outer shell of the cable are based on practical polyvinyl chloride. It has increased resistance to aggressive chemicals (acids, alkalis, solvents, oils), is non-flammable and does not require moisture content in the environment. This model has permission for open installation between the channel and the connected object.
Technical characteristics of the control cable 2-NORM TRAY-CY TC-ER MTW UL/CSA:
Number of conductive cores: up to 25;Core cross-section: up to 70 mm2;
Operating voltage: 0.6 - 1 kV;
Test voltage: 6 kV;
Conductor: copper, thin-wire;
Configuration: Class 5, according to DIN VDE 0295 and CEI 20-29;
Insulation material: Polyvinyl chloride;
Marking of cores: white numbering on black, for the number of cores more than 3 there is a yellow-green grounding wire;
Twisting method: layer-by-layer twist;
Screen: common copper braid (tinned), about 85% coating, polyester film to protect contacts;
The outer shell is polyvinyl chloride;
Wire resistance: Class 5, according to DIN VDE 0295 and IEC;
Minimum bending radius (stationary): 6 x per cable diameter;
Minimum bending radius (in operation): 20 x per cable diameter;
Stationary temperature: -40 C /+90 C;
The temperature of the conductor is movable: - 5 C /+90 C;
Insulation material properties: does not contribute to the spread of fire, according to IEC 60332-1, IEC 60332-3A and UL category FT4/IEEE;
U.S.: ul 1277 U.S. 1063 U.S./U.S. CSA. UL 10012 2587.
Environmental requirements: it has increased oil resistance and is resistant to acids and alkalis (UL OIL RES I), waterproof, it is allowed to be laid with other low voltage wires (no more than 600 V).
