Flexible Control Cables TKD Kabel KAWEFLEX 6210 SK-C-PVC UL/CSA

Flexible shielded cable KAWEFLEX 6210 SK-C-PVC UL/CSA productions TKD kabel (TKD cable)  It is used to connect and control various types of mobile equipment, installed in tow chains. It meets the high requirements of electrical parameters, ensures compliance with electromagnetic compatibility, and is recommended for a moderate degree of mechanical load.

The shell materials do not contain silicone, the surface has a low adhesion effect. It has a permit for joint laying with other low-voltage wires with a nominal value not higher than 0.6 V.

Technical Characteristics of KAWEFLEX 6210 SK-C-PVC UL/CSA shielded control cable:

Number of conductive cores: up to 42;
Core cross-section: up to 2.5 mm²;
Conductor: copper, thin-wire;
Configuration: Class 6, according to DIN VDE 0295 and IEC 60228;
Core marking: according to VDE 0293, black with white numbering, yellow-green grounding wire;
Twist: layered;
Insulation material: Polyvinyl chloride;
Screen: copper braid (tinned), surface coating about 85%;
Outer shell: polyvinyl chloride;
Operating voltage: 0.3 - 0.6 kV;
Test voltage: up to 4 kV;
Conductor resistance (20 °C): Class 6 (DIN VDE 0295, IEC 60228);
Insulation resistance (20 °C): 20 mOhm x km;
Minimum bending radius (stationary): 4 x Diameter;
Minimum bending radius (in operation): 10 (12.5) x diameter;
Temperature (stationary): -40 ° C /+90 °C;
Temperature (movable): -5 °C /+90 °C;
Maximum operating speed: up to 300 meters/min;
Insulation material properties: does not contribute to the spread of fire, according to IEC 60332-1-2, FT1, VW-1;
Standards: UL/CSA - cURus 600B, 90°C;
Environmental requirement: oil resistance according to EN 60811-2-1.