Flexible cable KAWEFLEX 6230 SK-C-PUR UL/CSA productions TKD kabel (TKD cable) It is used to connect and control various types of mobile equipment, installed in tow chains. It meets the high requirements of electrical performance, is equipped with a protective shield to ensure compliance with electromagnetic compatibility, is recommended for high degrees of mechanical loads, and is adapted to work in a wide range of ambient temperatures.
There is no silicone in the materials, all shells are halogen-free, the outer surface has a low adhesion effect. It has a permit for joint laying with other low-voltage wires with a nominal value not higher than 0.6 V.
Technical specifications of the KAWEFLEX 6230 SK-C-PUR UL/CSA control cable:
Number of conductive cores: up to 42;
Core cross-section: up to 2.5 mm2;
Conductor: copper, thin-wire;
Configuration: Class 6, according to DIN VDE 0295 and IEC 60228;
Core marking: coding according to VDE 0293, black insulation tone with white numbering, grounding wire yellow-green;
Twisting: in layers;
Insulation material: original PELON 2 connection;
Screen: copper braid (tinned), surface coating about 85%;
Outer shell: polyurethane foam;
Operating voltage: 0.3 - 0.6 kV;
Test voltage: up to 4 kV;
Conductor resistance (20 °C): Class 6 (DIN VDE 0295, IEC 60228);
Insulation resistance (20 °C): 20 mOhm x km;
Minimum bending radius (stationary): 4 x Diameter;
Minimum bending radius (in operation): 7.5 (10) x diameter;
Temperature (stationary): -50 °C /+80 °C;
Temperature (movable): -40 ° C /+80 °C;
Maximum operating speed: up to 300 meters/min;
Insulation material properties: does not contribute to the spread of fire, according to IEC 60332-1-2, FT1, VW-1;
Standards: UL/CSA - cURus 1000B, 90°C;
Environmental requirement: oil resistance according to EN 60811-2-1 (mineral).
