Asynchronous electric motors are used complete with a flexible power shaft and a vibrating tip to seal concrete mixtures stacked in small arrays, monolithic, densely and medium reinforced structures with a pitch between the reinforcement rods of at least 1.5 diameter of the vibrating tip.
Parameters |
IV-117A |
IV-116A-1.6 |
EPC-1300 |
EPC-1800 |
BP-5.5 |
IV-120 |
Engine Type |
Asynchronous electric motor |
Petrol |
Collector |
|||
Food |
42V; 3f; 50Hz |
42V; 3f; 50Hz |
220V; 1f; 50hz |
220V; 1f; 50hz |
Gasoline AI-92 |
220V; 1f; 50hz |
Power, kW |
1,00 |
1,60 |
1,30 |
1,80 |
4,00 |
0,75 |
Current frequency, Hz |
50 |
50 |
50 |
50 |
50 |
|
Synchronous frequency, rpm-1 |
3000 |
3000 |
3000 |
3000 |
3600 |
2800 |
Weight, kg |
12,5 |
16,0 |
14,9 |
16,9 |
28,0 |
|
Compatibility with vibration tips |
all |
all |
all |
all |
all |
28, 38, 51 |
Also, a version with thermal protection is available. It provides automatic power off of the electric drive in the event of an overload of the motor or a sudden increase in the temperature of the motor stator. The electric drive can be switched on again after the engine has cooled down.
The EPA-220 battery electric drive is a universal product designed to transfer mechanical rotation through a flexible power shaft (no more than 1m long) to a 28mm vibrating tip, as well as various attachments for tools and fixtures. It can be used as an impact screw.
The EPA-220 battery electric drive is most effectively used in hard-to-reach places where it is difficult to use a tool with a conductive cable.