TKD Kabel J-HStH Bd Data Cable

Cable J-H(St)The H-Bd manufactured by TKD kabel (TKD cable), which does not contain halogen, is used as an installation and control cable. It is laid in areas with high fire risk, with a large crowd of people and expensive equipment. It is used in control technology, measuring instruments and computer technology. It is laid in rooms with varying degrees of humidity, both under and over plaster. With UV protection, it can also be laid outside. Laying in the soil is not allowed.

Technical specifications:

Number of conductive cores: up to 100; Core diameter: up to 0.8 mm2;

Conductor: made of a single copper wire.

Structure: wire thickness-0.6 mm (0.28 MMVI), wire thickness-0.8 mm (0.50 MMVI).

Cable insulation material J-H(St)H Bd: polymer composition, does not contain halogen.

Core marking: according to DIN VDE 0815, different colors.

Twisting method: four veins are twisted into a four (in the form of a star), bundles are twisted into layers.

Common screen: laminated aluminum foil, with copper auxiliary wire.

The outer shell: It does not contain halogen.

Rated voltage: 300 V.

The minimum bending radius is static: 7.5 x cable thickness.

Minimum bending radius in motion: 10 x cable thickness.

Stationary temperature: -30 C /+70 C.

Temperature in motion: -5 C /+50 C.

Insulation properties of the J-H(St) cableH Bd: difficult to ignite, according to DIN EN 50266-2-4, VDE 0472 and IEC 60332.3 CA T C, minimum flue gas density; corrosion resistance, according to VDE 0472 part 813 and IEC 60754-1.

Standard: according to DIN VDE 0815.

 

Environmental requirements:

In the production of J-H(St) cableH Bd does not use organosilicon rubber.

The supply of the J-H(St) cable is providedH Bd BMK n x 0.8 mm, for fire alarm, with red shell.