TKD Kabel PAARTRONIC Data Cable-CY LIYCY TP UL/CSA

Flexible shielded PAARTRONIC-CY LIYCY (TP) UL/CSA cable manufactured by TKD kabel (TKD cable) with color-coded cores, consisting of twisted pairs according to UL/CSA standards. It is used as a control, signal, connecting cable for the transmission of analog and digital signals in measuring, control equipment and computer systems. It is intended for stationary installation and for flexible connection in free movement without tension load, and without forced motion control. It is used for laying in dry and damp rooms, but not for laying in the soil. It can be used outdoors, only with UV protection and temperature-sensitive.

Technical specifications:

Number of conductive cores: up to 5; Core diameter: up to 0.75 mm2;

Conductor: tinned copper wire.

Structure: consists of seven wires.

Insulation Material: PVX.

Marking of veins: according to From 47100 grey outer shell; according to the color code IThe EU outer shell is black.

Twisting method: two strands are twisted into a pair, the pairs are twisted in layers with optimal twisting steps.

Overall screen: tinned copper wire braid, 85% coating.

Outer shell material: PVX.

Cable sheath color PAARTRONIC-CY LIYCY (TP) UL/CSA: grey or black.

Rated voltage: 300 V.

Wire resistance: according to From CEOE 0295 cat. 2; corresponds to IEU 60228 cat. 2.

The minimum bending radius is stationary: up to 12 mm - 5 x cable thickness; up to 20 mm - 7.5 x cable thickness; more than 20 mm - 10 x cable thickness.

Minimum bending radius in motion: up to 12 mm - 10 x cable thickness; up to 20 mm - 15 x cable thickness; more than 20 mm - 20 x cable thickness.

Stationary temperature: -30 C /+80 C.

Temperature in motion: -5 C /+70 C.

Insulation properties: according to IEC 60332-1 (flame retardant, self-extinguishing).

Cable standard: UL-Statle1061, UL-Statle 2464 and CSAhWM I/II But.

Norms: UL and withSBut.

 

 

Environmental requirements:

It is resistant to acids, alkalis, and some types of technical oils.

Organosilicon rubber is not used in production.

It is recommended to work with electromagnetic compatibility.

It is amenable to clamping, soldering, crimping and cutting.