TKD Kabel RD-HSTH Bd Data Cable

RD-H(ST) Flexible CableH-Bd manufactured by TKD kabel (TKD cable), halogen-free with an aluminum foil screen, color-coded cores, consisting of twisted pairs. It is used as a control, signal, connecting cable for the transmission of analog and digital signals in measuring, control equipment and computer systems for the transmission of data and signals without loss, in fire-hazardous areas with a large concentration of people and expensive equipment. It is intended for stationary installation and for flexible connection in free movement without tension load, and without forced motion control. It is used for laying in dry and wet rooms, on and under plaster, but not for laying in the soil. It can be used outdoors, only with UV protection and temperature-sensitive. RD-H(ST)H-Bd is an instrument (instrumental) cable for connecting instrumentation and automation devices, metering sensors.

Technical specifications:

Number of conductive cores: up to 96; Core diameter: up to 0.5 mm2;

Conductor: copper, made of many wires.

Structure: consists of seven wires.

Insulation: special, halogen-free.

Core marking: according to DIN VDE 0815.

The method of twisting the RD-H(St) cableH Bd: two strands are twisted into a pair, every four pairs are twisted into bundles, the bundles are numbered.

Common screen: laminated aluminum foil, with 0.5mm (7 x 0.3 mm) thick copper grounding wire.

Outer shell: special, halogen-free.

Rated voltage: 225 V.

The minimum bending radius is fixed: 7.5 x cable thickness.

Minimum bending radius in motion: 10 x cable thickness.

Stationary temperature: -30 C /+70 C.

Temperature in motion: -5 C /+50 C.

Insulation properties: difficult to ignite, according to DIN EN 50266-2-4, VDE 0472 and IEC 60332.3 (category) Cat. C

Standard: according to DIN VDE 0815.

 

Environmental requirements:

It is resistant to alkalis, acids, and certain types of technical oils.

Organosilicon rubber is not used in production.

It is used for soldering-free confection technology of Machi-Tegmi-Point - electrical installation, due to the cable structure consisting of seven wires.