Low Voltage cable for KAWEFLEX 5268 C-PVC UL/CSA SERVO SERVO motors TKD kabel (TKD cable) It acts as a power cable with a small electrical capacity to provide power and control the operation of equipment in compliance with electromagnetic compatibility, for normal conditions of mechanical and electrical loads, an excellent combination of price and quality.
The cable sheath materials do not contain components such as silicone and freon, and have excellent resistance to fire and oils. It is recommended to operate in indoor conditions, this model is immune to moisture content.
Technical characteristics of the KAWEFLEX 5268 C-PVC UL/CSA SERVO servo cable:
Number of conductive cores: 4;
Core cross-section: up to 10 mm2;
Operating voltage: 0.6 - 1 kV;
Test voltage: 4 kV;
Conductor: copper, thin-wire;
Configuration: Class 5, according to DIN VDE 0295 and IEC 60228;
Insulation material: special compound PELON 2 PP;
Screen: common copper braid (tinned) with a surface coating of about 80%, individual for control pairs and triads;
Marking of cores: for power black background with white numbering, control black and white, yellow-green grounding wire;
Twisting method: joint, flexible filler;
Outer shell: polyvinyl chloride;
Wire resistance: Class 5, according to DIN VDE 0295 and IEC 60228;
Minimum bending radius (stationary): 5 x per cable diameter;
Minimum bending radius (in operation): 10 x per cable diameter;
Temperature (stationary): -30 °C /+80 °C;
Temperature (movable): - 5 ° C /+80 °C;
Insulation material properties: does not contribute to the spread of fire, according to EN 60332-2-1, UL: VW1; CSA: FT1;
Standards: UL 80°C, 1.000 V, cULus 80°C, 1.000 V.
Environmental requirements: resistance to mineral oils according to ISO 6722, EN 60811-2-1, indoor operation, the possibility of laying with other wires with a nominal value not higher than 0.6 kV.
