Кабели для систем BUS, LAN TKD Kabel EIB BUS TP-ST-PVC /H KNX

Cable EIB BUS TP-(ST)-PVC /H (KNX standard) production TKD kabel (TKD cable) in the 2 x 2 x 0.8 mm version, it is used to connect high-tech modern building automation systems, for controllers of various types of electrical equipment, for example, light sources, security systems, heat supply elements, control of ventilation installations, timer control, etc. These developments provide a completely new level of comfort, security and resource saving.

It is recommended for permanent installation conditions in dry and humid rooms, does not spread gorenje.

The model has two types of execution: PVC and halogen-free.

Technical characteristics of the EIB BUS TP-(ST)-PVC/H cable:

Number of conductive cores: 4;
Core cross-section: 0.8 mm2
Conductor: copper;
Configuration: single-wire cores;
Marking of veins: colored, white/yellow and red/black pairs;
Twist: starry;
Insulation material: polyvinyl chloride /halogen-free compound;
Contact protection coating: single layer polyethylene terephthalate film;
Screen: common, laminated aluminum film with drainage wire;
Outer shell: polyvinyl chloride /halogen-free compound;
Operating voltage: 0.3kV;
Test voltage: 4 kV;
Conductor resistance: up to 73 ohms/km;
Insulation resistance: minimum 100Mohm;
Capacity: up to 48 nF/km (frequency 800 Hz);
Minimum bending radius (stationary):10 x Diameter;
Minimum bending radius (movable):15 x Diameter;
Temperature (stationary): -30 °C /+70 °C;
Temperature (movable): -5 ° C /+50 °C;
Insulation material properties: does not contribute to the spread of fire, IEC60332-1;
Environmental requirements: resistant to UV radiation, indoor operation at any degree of humidity.