System Bus Cable, LAN TKD Profinet PVC FR Cable

Cable Profinet PVC FR productions TKD kabel (TKD cable) It is designed to transmit data and signals according to the Profinet® communication standard for automation in industrial systems. The speed is a maximum of 100 Mbit/sec.

There are two versions of the design of this model: type A for stationary laying conditions, and type B flexible design for movable joints. As well as two versions: standard and modification FC (Fast Connect Instruction) for quick installation.

Technical Characteristics of Profinet PVC FR cable:

Number of conductive cores: 4;
Core cross-section: 0.326 mm2
Conductor: copper (A), tinned copper (B);
Configuration: single-wire (A). 7-wire (B);
Marking of veins: colored, yellow, white, orange and blue;
Twist: starry;
Insulation material: Polyolefin;
Contact protection layer: polyethylene film;
Screen: common, in two layers, aluminum film and tinned copper braid;
Inner shell: polyvinyl chloride (for FC modification);
Outer shell: special compound based on polyvinyl chloride;
Operating voltage: 0.125 kV;
Test voltage: 1 kV;
Conductor resistance: up to 115 ohms/km;
Insulation resistance: minimum 20 mOhm;
Capacity: up to 48 nF/km (frequency 800 Hz);
Minimum bending radius (stationary): 7.5 (A) x diameter, 3 x diameter for single bending;
Minimum bending radius (movable): 8 (B) x diameter;
Temperature (stationary): -40 ° C /+80 °C;
Temperature (movable): -5 ° C /+50 °C;
Insulation material properties: does not contribute to the spread of fire, according to FT4 according to UL 1685, IEC 60332-3-25;
Environmental requirements: resistant to UV radiation, indoor operation at any degree of humidity.