Клапан соленоидный Plesk P4600-15-150-1HA, DN15 PN24, НЗ, ПС15,0мм, KV70л/м, Tmax +100°С

Клапан соленоидный Plesk P4600-15-150-1HA, DN15 PN24, НЗ, ПС15,0мм, KV70л/м, Tmax +100°С

TECHNICAL DATA

• Medium: water, light oil products, non-aggressive liquids and neutral gases, not used for aggressive liquids and gases
• Safety Function: Normally Closed (NC) (R4600 Series) and Normally Open (NO) (R4601 Series)
• Control type: direct action
• Number of moves: 2/2 (Ports/Positions)
• Sizes: G1/8" – G1/4"
• Connection: Thread G (BSPP /ISO 228-1)
• Pressure ranges: 0-16 bar (4600), 0-12 bar (4601)
• Ambient temperature: -10 °C ... +100 °C
• Ambient temperature: -20 °C – +70 °C
• Opening time: 25ms
• Closing time: 25ms
• Maximum viscosity: 38cSt or mm2/s
• Maximum allowable pressure: 24 bar (P4600), 18 bar (P4601)
• Does not require minimum overpressure, internal exhaust system (for P4601)
• Compact design
• Valve seal: O-rings
• Voltage: AC, DC
• Coil rearrangement without valve disassembly (independently AC, DC)
• Low pressure loss, low power consumption
• Different flow ranges, wide range of flow sections
• Installation in any position, but most optimally with the coil facing up
• The medium must be filtered before the valve
• The flow rate (Q) can be calculated based on the values of pressure, density and flow coefficient
• In accordance with 97/23/EC Pressure Equipment Directive (PED), 2006/95/EEC Low Voltage Equipment Directive (LVD), 2004/108/EC Electromagnetic Compatibility Directive (EMC)

advantages

Low resistance, does not require pressure drop, repeat.360° coil, compact design, light weight, patented technology, fast closing and opening, long service life.

options

• User parameters can be customized
• Под заказ: NPT (ANSi 1.20.3), R (BSPT/ISO 7–1), W (BSP), M (метрическая)
• On request: the diaphragm, seat and stem seal can be made of FPM (VITON) (-10 °C…160 °C), EPDM (-10 °C…140 °C)
• On request: various body coatings, nickel plating, various body materials, stainless steel internal elements (for
• P4601), manual doubler, stainless steel seat, with two mounting holes at the bottom of the valve
• On request: other voltage, frequency 60Hz, coil insulation class F (155 °C), coil fixation
• On request: with electronic timer, coil explosion protection for operation in zones 1/21–2/22 (Eex em II T4/T5), coil insulation material –
• it can be reinforced with fiberglass (V0 or V1)
• Other versions on request
• ELECTRICAL CHARACTERISTICS
• Protection class IP65 (EN 60529) (with connector)
• Connection connector: DIN 46340-3 pole connectors (DIN 43650)
• Connector specification: ISO 4400/EN175301–803, Form A, flat terminals (cable ∅6–8mm)
• Electrical safety: IEC 335, EN 60335-1, EN 60204-1
• Coil insulation class: N (180 °C)
• Coil impregnation: polyester fiberglass
• Coil insulation: reinforced glass fiber (V2)
• Voltage: for AC(~) 12V, 24V, 48V, 110V, 230V
• for DC(=) 12V, 24V, 48V, 110V, 230V
• Voltage tolerances: for AC(~) and DC(=) -10%...+10%
• Frequency: 50 Hz
• Working time: 100% ED
• Designed according to DIN VDE 0580