Conductix Crane and elevator cables-Wampfler C800

The Conductix-Wampfler C800 low voltage flexible crane cable is used for signal transmission and power supply, has transparent PVC sheaths through which multicolored conductors are clearly visible, a detachable cord is installed for ease of opening. Very compact design, practical and economical offer, used for winding and laying, often used on spring-loaded cable drums where there are space constraints.

Suitable for outdoor work in compliance with the temperature range, UV resistant.

Technical characteristics of the Conductix-Wampfler C800 cable:

• Number of conductive cores: 2 - 15;
• Section of the vein: 1 - 3 mm2;
• Diameter: 5.7 - 12.9 mm;
• Rated voltage: 0.6 - 1 kV;
• Conductor: copper;
• Configuration: flexible, Class 5 (IEC 60228);
• Marking of veins: in accordance with NFC 32090, CH 7.3, CE 502;
• Isolation: special compound based on polyvinyl chloride (PVC);
• The inner shell: special compound based on polyvinyl chloride (PVC);
• The outer shell: special compound based on polyvinyl chloride (PVC);
• Maximum operating speed (m/min): 60;
• Minimum bending radius: 6 x Cable diameter (winding);
• The maximum permissible temperature for the conductor: +80 °C;
• The temperature is stationary: -10 °C ... +60 °C;
• Temperature is movable: -10 °C ... +60 °C;

Environmental requirements: outdoor and indoor use, resistant to UV radiation, oils, moisture, low flammability according to IEC 60332-1, Class 3.