A series of low-voltage cables for towed chains Conductix-Wampfler CV /CV -D It is represented by all functional types: power, control and data cables. Shielded versions with a copper braid are also available for resistance to electromagnetic influences. Flexible and compact structure for small radius bends. Designed for operation with medium loads (speed and acceleration), adapted to frequent or constant bends. It is used for crane equipment of various types, irrigation systems, lifting blocks, etc.
A reliable and wear-resistant shell, it is used primarily in indoor conditions, since the lower temperature limit is limited. It is not susceptible to high humidity or dryness of the air, as well as to ultraviolet radiation.
Technical Characteristics of the Conductix-Wampfler CV /CV -D cable:
- Number of conductive conductors: 4 - 25;
- Section of the vein: 1.5 - 35 mm2;
- Diameter: 7.0 - 28.6 mm;
- Rated voltage: 0.6 - 1 kV;
- Conductor: electrolytic copper;
- Configuration: very flexible Class 6 (IEC 60228);
- Twisting: optimized in length, up to 11 strands twisting in layers, from 12 strands in bundles;
- Marking of veins: color coded according to DIN VDE 0293 part 308, over 5 wires are black with numbering, green-yellow grounding wire;
- Isolation: polyolefin;
- Screen: tinned copper braid, coating surface about 85%;
- The outer shell: polyvinyl chloride (PVC), grey;
- Maximum operating speed (m/min): 140;
- Minimum bending radius: 5 x Cable diameter (stationary), 10 x Cable diameter (movable);
- The maximum permissible temperature for the conductor: +70 °C;
- The temperature is stationary: -10 °C ... +80 °C;
- Temperature is movable: -5 °C ... +80 °C;
Environmental requirements: outdoor and indoor use, resistant to UV radiation, ozone, oils, moisture, low flammability (IEC 60332-1, FT1).
