Low voltage power and control cables Conductix-Wampfler RP /RP-D they have a flexible structure and are used for winding on cable drums of various types (cylindrical and monospiral), connecting and powering mobile equipment and lifting mechanisms with low and medium loads, subject to the restrictions specified in the parameters. The structure is compact due to optimized design and special materials, high resistance to abrasion, cracking and wear.
It is indicated for outdoor use, as it is immune to moisture, ultraviolet light and ozone. It does not contain harmful halogens and silicone. An economical offer.
Technical characteristics of the Conductix-Wampfler RP /RP-D cable:
- Number of conductive conductors: 3 - 36;
- Section of the vein: 1.5 - 185 mm2;
- Diameter: 11.3 - 59.0 mm;
- Rated voltage: 0.6 - 1 kV;
- Conductor: copper;
- Configuration: flexible Class 5 or ultra-flexible Class 6 (IEC 60228);
- Marking of veins: in accordance with DIN VDE 0293 part 308, over 7 black with white numbering, green-yellow ground wire;
- Twisting of veins: layered up to 3 layers, short length;
- Isolation: based on cross-linked polyethylene (XLPE) or polyester-based Semocore (PE);
- The inner shell: special polyurethane-based compound (PUR), double layer with twist protection;
- The outer shell: special polyurethane-based compound (PUR), black or yellow;
- Maximum operating speed (m/min): 80;
- Maximum tension (N/mm2): 15;
- Minimum bending radius: 8 x Cable diameter (winding), 6 x Cable diameter (on request), for S-type guide pulley, the limit is 20 x cable diameter;
- The maximum permissible temperature for the conductor: +90 °C;
- The temperature is stationary: -30 °C ... +80 °C;
- Temperature is movable: -20 °C ... +80 °C;
Standard sizes: 12YRDT11Y, 12YRDT11YH.
Environmental requirements: outdoor and indoor use, resistant to UV radiation, ozone, oils, moisture, low flammability (IEC 60332-1).
