Conductix crane and elevator cables-Wampfler TG H07RN-F

Flexible control and power cable Conductix-Wampfler TG It is designed for continuous operation in conditions of medium mechanical loads. It is used for festoon suspension and spring-loaded cable drums, for connecting and working with various cranes, trolleys, tourist vehicles, ship lifting equipment and other controlled equipment (only horizontal direction of movement).

A very economical and durable offer, with good indicators of flexibility and elasticity of the structure. It is suitable for outdoor work, observing temperature limits, resistant to ultraviolet light and humidity.

Technical characteristics of the Conductix-Wampfler TG cable:

• Number of conductive cores: 1 - 24;
• Section of the vein: 1.5 - 240 mm2;
• Diameter: 9.2 - 38.3 mm;
• Rated voltage: 0.45 - 0.75 kV;
• Conductor: electrolytic copper;
• Configuration: flexible Class 5 (IEC 60228);
• Marking of veins: up to 5 color coded, over black with white numbering, green-yellow ground wire;
• Isolation: special compound based on ethylene propylene rubber (EPR);
• The outer shell: special rubber compound (CR) EM2, black color;
• Maximum operating speed (m/min): 80 (festoon systems), 60 (winding);
• Maximum tension (N/mm2): 15;
• Minimum bending radius: 5 x Cable diameter;
• The maximum permissible temperature for the conductor: +80 °C;
• The temperature is stationary: -30 °C ... +80 °C;
• Temperature is movable: -25 °C ... +80 °C;

Standard sizes: H07RN-F

Environmental requirements: outdoor and indoor use, resistant to UV radiation, oils, moisture, low flammability (IEC 60332-1).