Cable Conductix-Wampfler TXG /TXG-D it has excellent elasticity and is designed for conditions of high mechanical loads, an ideal solution for festoon use, for trolleys, movable blocks and other crane equipment of various types, as well as stackers, dump trucks and loading port installations, etc. The range of models includes a shielded version, power, control and data cables are allocated according to functionality.
A reliable and long-lasting offer, maximum stability in dynamic operation. High degree of stability and immunity to many atmospheric factors, low temperatures (up to -35 °C), chemical effects. It does not contain silicone.
Technical Specifications of the Conductix-Wampfler TXP /TXP-D cable:
- Number of conductive conductors: 1 - 36;
- Section of the vein: 1.5 - 185 mm2;
- Diameter: 10.0 - 43.9 mm;
- Rated voltage: 0.6 - 1 kV;
- Conductor: electrolytic copper;
- Configuration: flexible Class 5 (IEC 60228);
- Twisting: layered;
- Marking of veins: black numbering on light insulation, green-yellow ground wire;
- Isolation: Ethylene propylene rubber (EPR);
- Screen: tinned copper braid, coating surface about 85%;
- The outer shell: Polychloroprene compound (PCP), 5GM5, black;
- Maximum operating speed (m/min): 250;
- Maximum tension (N/mm2): 15;
- Minimum bending radius: 5 x Cable diameter;
- The maximum permissible temperature for the conductor: +90 °C;
- The temperature is stationary: -50 °C ... +80 °C;
- Temperature is movable: -35 °C ... +80 °C;
Standard sizes: NGRDGOEU, (N)GRDGOEU, NGRDGCOEU, (N)GRDGCOEU, (N)3GRD5G-J/O, (N)3GRDGC5G-J/O
Environmental requirements: outdoor and indoor use, resistant to UV radiation, ozone, oils, moisture, low flammability (IEC 60332-1).
