Crane and elevator cables of Prysmian Group MStDHOEU

Crane cables from Prysmian Group they have the most compact dimensions (up to 30% less than analogues) while maintaining all indicators at the proper high level, and thanks to improved technology, the weight is reduced by 40%. They do an excellent job in harsh conditions, are resistant to repeated bending, abrasion and physical resistance.

Flat Crane Cable Prysmian M(StD)HOEU Low voltage (0.6 - 1 kW) withstands average mechanical loads and frequent bends (in the same plane). It is used on suspended festoon systems, connecting moving parts of installations.

Variants of the models: 

- shielded 4-core power cables;

- shielded control panels;

- control panels with separately shielded cores.

Technical characteristics of the crane cable Prysmian M(StD)HOEU:

Number of conductive cores: up to 12;
Core cross-section: up to 95 mm²;
Core diameter: up to 13.1 mm;
Conductor: copper, packed in paper tape or polyethylene terephthalate film;
Configuration: Class 5 (up to 25 mm²) and 6 (35 and over mm²), according to IEC 60228 /DIN EN 60228;
Marking of cores: up to 5 cores colored according to DIN VDE 0293-308, 6 or more black with white numbering;
Insulation: rubber, connection type 3GI3;
Screen: individual aluminum-polyethylene terephthalate (ALU/PETP) film, copper wire braid;
Outer shell: chloroprene base, 5GM3 compound, black color;
Maximum operating speed (m/min): 180;
The maximum permissible temperature for the conductor: +90 C;
Stationary temperature: -40 °C ... +80 °C;
Movable temperature: -30 °C ... +80 °C;
Standard sizes: M(STD)HOEU-J, M(STD)HOEU-O.
Environmental requirement: unlimited outdoor and indoor operation, resistant to ozone, ultraviolet rays and moisture, resistant to oils.