Crane and elevator cables of Prysmian Group PANZERFLEX-L NSHTOU-JZ /-OZ

Low voltage control cable Prysmian PANZERFLEX-L It has a flexible design and is used to connect moving parts of machine tools, crane and unloading type equipment. It perfectly copes with high mechanical loads (frequent bending, twisting, moving with acceleration) when working on cable coils and suspended festoon systems.

The insulation materials and rubber sheaths have a special improved composition. Resistance to many environmental factors allows the cable to be used outdoors. A frost-resistant version (marking -K) is also available for temperatures below -40 °C.

Technical characteristics of the Prysmian PANZERFLEX control crane cable-L(N)SHTOU-JZ /-OZ:

• Number of conductive conductors: from 3 to 36;
• Section of the vein: from 1.5 to 4 mm²;
• Core diameter: from 5.09 to 13.7 mm;
• Conductor: tinned copper, thin-wire;
• Configuration: Class 5 (IEC 60228);
• Marking of veins: according to DIN VDE 0293;
• Twisting of veins: straight laying, tape separation;
• Isolation: special HEPR compound, an improved analogue of 3GI3;
• The inner shell: polychloroprene rubber, an improved analogue of GM1;
• Protective shells: synthetic fibers, anti-twisting effect;
• The outer shell: polychloroprene rubber, an improved analogue of 5GM2, black color;
• Maximum operating speed (m/min): 240;
• Maximum mechanical load: up to 15 N/mm2;
• The maximum permissible temperature for the conductor: +90 S;
• The temperature is stationary: -40 °C ... +80 °C;
• Temperature is movable: -25 °C ... +80 °C;

Standard sizes: (N)SHTOU-JZ /-OZ;

Environmental requirements: Unlimited outdoor and indoor use, resistant to UV radiation, oils and moisture.