Shielded low voltage control (signal) cable Prysmian PANZERFLEX-SIGNAL It has a flexible design and is used to connect moving parts of machine tools, crane and unloading type equipment, ensures compliance with electromagnetic compatibility. It perfectly copes with high mechanical loads (frequent bending, twisting, moving with acceleration) when working on cable coils and suspended festoon systems.
The insulation materials and rubber sheaths have a special improved composition. Resistance to many environmental factors allows the cable to be used outdoors. A frost-resistant version (marking -K) is also available for temperatures below -40 °C.
Технические характеристики контрольного кранового кабеля Prysmian PANZERFLEX-SIGNAL (N)SHTOU-JZ /-OZ:
- Number of conductive cores: from 3 to 26;
- Section of the vein: from 1.0 to 2.5 mm2;
- Core diameter: from 8.21 to 20.0 mm;
- Conductor: tinned copper, thin-wire;
- Configuration: Class 5 (IEC 60228);
- Marking of veins: black color with white numbering of cores, with or without a yellow-green ground wire;
- Twisting of veins: direct laying, layered for stranded cables (up to 3 layers), tape separation;
- Isolation: special compound based on ethylene propylene rubber, an improved analogue of 3GI3;
- The inner shell: polychloroprene rubber, an improved analogue of GM1;
- Screen: individual single core or pair, material - tinned copper Textiles are used to fill the gaps;
- Protective shells: synthetic fibers, anti-twisting effect;
- The outer shell: polychloroprene rubber, improved analogue of 5GM2, black color;
- Maximum operating speed (m/min): 180;
- Maximum mechanical load: up to 15 N/mm2;
- The maximum permissible temperature for the conductor: +90 S;
- The temperature is stationary: -40 °C ... +80 °C;
- Temperature is movable: -25 °C ... +80 °C;
Standard sizes: (N)SHTOU-JZ /-OZ;
Environmental requirements: Unlimited outdoor and indoor use, resistant to UV radiation, oils and moisture.
