Fiber Optic Crane Cable FESTOONFIBERFLEX PUR-HF productions TKD kabel (TKD cable) for transmitting data or signals under conditions of particularly high mechanical loads, namely frequent and strong bends. It is recommended for working with mobile equipment, fits into cable trolleys, chains (tow), in the winding mode on coils without the influence of traction voltage.
The shell materials do not contain silicone and halogens. The gasket is possible in indoor conditions, in open areas and in explosive zones, it is impervious to humidity, resistant to ultraviolet radiation and ozone.
Version FO It is equipped with a fiber-optic core for data transmission, fiber type 62.5-125 µ.
Technical Characteristics of FESTOONFIBERFLEX PUR-HF fiber optic crane cable:
Number of conductive cores: up to 24;Core cross-section: 125 mm2;
Conductor: optical fiber, types 9/125, 50/125, 62.5/125;
Twisting: the fibers are in polyethylene terephthalate polyester (PETP) tubes with gel filler;
Insulation material: Polyethylene terephthalate polyester (PETP);
Outer shell: polyurethane foam;
Minimum bending radius (stationary): 6 x Cable diameter;
Minimum bending radius (in operation): 10 x Cable diameter;
Temperature (stationary): -40 ° C /+80 °C;
Temperature (movable): -30 °C /+70 °C;
Maximum operating speed: up to 240 m/min;
Insulation material properties: does not contribute to the spread of fire, according to IEC 60332-1;
Environmental requirements: unlimited indoor and outdoor operation at any moisture concentration in the air, oil resistance according to EN 60811-2-1. Additionally, it is possible to manufacture a waterproof version with a depth of immersion in water (for non-drinking purposes) up to 50 meters.
