Unshielded flat cable H07VVH6-F manufactured by TKD kabel (TKD cable) with digitally labeled cores. It is used as a control cable for transport devices, machine tools, especially on lifting mechanisms, elevators, cranes and container bridges and in all cases where the wiring is subjected to severe deflections and constant movements in only one plane during operation. It is intended for laying in dry, wet and damp rooms. H07VVH6-F is an elevator cable used as part of elevators.
Technical specifications:
Number of conductive cores: up to 24; Core diameter: up to 95mm2;
Conductor: made of copper, made of several wires;
Cable structure: according to From CEOE 0295 category 5, corresponds to IEU 60228 category 5;
Insulation Material: PVC;
Twisting method: the cores are located next to each other and in parallel;
Marking of veins: according to CEOE 0293 - 308 up to 5 veins - of many colors, over 6 veins - black with white markings, without or with the presence of a yellow - green vein;
Markup: present;
Outer shell: PVC;
The minimum bending radius is fixed: according to From CEOE 0298 part 3;
The smallest permissible bending radius is movable: according to From CEOE 0298 part 3;
Stationary temperature: -30 C /+60 C;
Travel temperature: -20 C /+60 C;
The highest temperature on the conductor: +70 C;
Shell properties: self-extinguishing, difficult to ignite, according to IEU 60332 – 1;
Standard: according to From CEOE 0281 part 404.
Environmental requirements:
Bending radius of the cable H05VVH6-F; (H)05VVH6-F significantly smaller than a round-shaped cable. Organosilicon rubber is not used (in the manufacture).