Crane and elevator cables TKD Kabel MStDHOU

Shielded flat cable M(StD)HOU manufactured by TKD kabel (TKD cable) with color-coded cores. It is used as a connecting, control, signal cable for process wagons, transport devices, machine tools, shipyards, especially on lifting mechanisms, elevators, cranes and container bridges and in all cases where the wiring is subjected to severe deflections and constant movements in only one plane during operation. It is intended for laying in dry, wet and damp rooms and for outdoor use. M(StD)HOU is an elevator and crane cable used as part of elevators, cranes.

Technical specifications:

Number of conductive cores: up to 12; Core diameter: up to 95mm2;

Conductor: copper, made of several wires;

Configuration: according to From CEOE 0295 category 5/6, corresponds to IEU 60228 category 5/6;

Shell: rubber, made of special composition;

The designation of the veins: according to CEOE 0293 - 308 up to 5 veins - multicolored, more than 6 veins - black with white -colored numbering, with the presence of a yellow - green vein;

Twisting scheme: the location of the veins is parallel, next to each other;

Marking: yes;

Coating insulation: polychloroprene (neoprene), (NEOPRENEE);

Cable Screen M(StD)HOU (EMI): consists of foil, plus tinned copper wire;

Minimum bending radius without movement: according to From CEOE 0298 section 3;

The smallest permissible bending radius is movable: according to From CEOE 0298 section 3;

Maximum conductor temperature: +90 C;

Stationary temperature: -40 C /+80 C;

Temperature in motion: -30 C /+80 C;

Shell properties: hard-to-burn, according to IEU 60332 – 1;

Standard: in accordance with From CEOE 0250.

 

Environmental requirements:

It does not have organosilicon rubber (in production).