Crane and elevator cables TKD Kabel YFLY,KYFLY

Unshielded YFLY-KYFLY flat cable manufactured by TKD kabel (TKD cable) with digitally labeled cores. It is used as a control cable for transport devices, machine tools, especially on lifting mechanisms, elevators, cranes and container bridges and in all cases where the wiring is subjected to severe deflections and constant movements in only one plane during operation. It is intended for laying in dry, wet and damp rooms. YFLY-KYFLY is an elevator cable used as part of elevators.

Technical specifications:

Number of conductive cores: up to 8; Core diameter: up to 1.5 mm2;

Conductor: copper, made of several wires;

Structure: according to From CEOE 0295 category 5/6, corresponds to IEU 60228 type 5/6;

Insulation Material: PVC;

Marking of veins: according to CEOE 0293 - 308 up to 5 veins - multicolored, more than 6 veins - black with white markings, without or with a yellow - green vein

Twisting method: the location of the veins is parallel, one next to the other;

Markup: present;

Outer shell: PVC;

Minimum bending radius without movement: 10 x cable thickness;

Minimum bending radius in working condition: 10 x cable thickness;

The highest conductor temperature: +70 C;

Temperature without movement: -25 C /-40 C /+70 C;

Operating temperature: -25 C /-30 C /+70 C;

Shell properties: self-extinguishing, difficult to ignite, according to IEU 60332 – 1;

Standard: according to From VDT 0250.

 

Environmental requirements:

It does not have organosilicon rubber (during manufacture).

Cable KYFLY frost-resistant.