Description
Features
Reviews
Main Features
| product series | Lexium 28 | |
|---|---|---|
| the type of device or its accessories | Motion control servo | |
| short name of the device | LXM28A | |
| the shape of the drive | Compact housing | |
| linear current | 10 A, THDI of 144.8% at 220 test3, three-phase 10 A, THDI of 166.6% at 220 test3, single-phase |
Additional features
| number of network phases | Single-phase Three-phase |
|
|---|---|---|
| [Us] rated mains voltage | 220 test3 (- 10...15%) for three-phase 220 test3 (-20...15%) for single-phase |
|
| supply voltage limits | 170...255 test3 for single-phase 200...255 test3 for three-phase |
|
| Power supply frequency | 50/60 Hz (- 5...5 %) | |
| network frequency | 47,5...63 Hz | |
| interference filter | Without interference filter | |
| Continuous output current | 7 A at 16 kHz | |
| Peak output current, 3 s | 21 A at 220 test3 | |
| Continuous power | 1500 test4 at 220 test3 | |
| Rated power | 1.5 kW at 220 test3. 16 kHz | |
| Switching frequency | 16 kHz | |
| Overvoltage category | III | |
| leakage current | 4.5 mA | |
| Output voltage | <= напряжение питания | |
| galvanic isolation | Between the power and control circuits | |
| cable type | Shielded motor cable (temperature: 0...55 °C) copper | |
| electrical connection | Spring clamp, clamping capacity: 1.3...1.5 mm2, AWG 16 (L1-L2) Spring clamp, clamping capacity: 1.3...1.5 mm2, AWG 16 (R, S, T) Spring clamp, clamping capacity: 1.3...1.5 mm2, AWG 16 (U, V, W, PE) Spring clamp, clamping capacity: 1.3...1.5 mm2, AWG 16 (PA/+, PBe) |
|
| number of digital inputs | 8 Programmable (CN1) 2 quick collection (CN1) 1 safety function STO (CN9) 1 Pulse sequence input (PTI) (CN1) |
|
| digital input voltage | 24 V post. Current (logical) | |
| type of digital inputs | Positive or negative (CN1) | |
| number of digital outputs | 5 logic output (CN1) at 12...24 test3 DC 1 Pulse sequence output (PTO) (CN1) |
|
| digital output voltage | 12...24 test3 post. current | |
| discrete output logic | Positive or negative (CN1) | |
| The number of the analog input | 2 | |
| absolute measurement error | 0.1 % | |
| Connection type | Analog voltage signal input (T_REF) Analog voltage signal input (V_REF), - 10...10 V input impedance: 10 kOhm, resolution: 14 bits |
|
| type of control signal | CN2 : servo motor encoder feedback | |
| types of implemented protections | From reverse polarity (signal at the inputs) Short circuit protection (output signal) Overload currents (motor) Maximum voltage protection (motor) Minimum voltage protection (motor) Excess temperature (engine) Restart (engine) Speeding (engine) |
|
| protection function | STO (Safe torque shutdown), integrated | |
| security level | SIL 2 in accordance with IEC 61800-5-2 :2007 SIL 2 in accordance with IEC 61508-1 : 2010 PL d/category 3 in accordance with EN/ISO 13849-1:2008 SIL 2 in accordance with EN/ISO 13849-1 :2009/AC SIL 2 in accordance with EN 60204-1 : 2006 SIL 2 in accordance with EN 60204-1 : 2009/A1 SIL 2 in accordance with EN 60204-1 : 2010/AC SIL 2 in accordance with IEC 62061 : 2012 |
|
| communication interface | CANmotion, integrated CANopen, integrated |
|
| connector type | RJ45 (CN4) for CANopen, CANmotion | |
| access method | The slave | |
| transfer rate | 250 kbit/s for bus length of 100...250 m for CANopen, CANmotion 500 kbit/s for bus length of 4...100 m for CANopen, CANmotion 1 Mbit/s for bus length of <= 4 m for CANopen, CANmotion |
|
| number of addresses | 1...127 for CANopen, CANmotion | |
| the physical interface | RS485 (slave device serial Modbus lines) | |
| LED status indicator | 1 Red LED to check for breaks in the coil 1 LED red for charging 1 LED green for RUN |
|
| alarm function | The status of the servo motor and the error code in five 7-segment.display devices | |
| marking | THIS CSA Asshole |
|
| type of cooling | Built-in fan | |
| working position | Vertical | |
| Product compatibility | Servo motor BCH2 (130 mm, 3 motor stacks) at 1500 W | |
| width | 55 mm | |
| height | 150 mm | |
| depth | 170 mm | |
| Product weight | 1.2 kg | |
| Output current 3 s peak value 2 | 21 A 220 test3 | |
| Output current 3 s peak value 3 | 21 A 220 test3 |
Operating conditions
| electromagnetic compatibility | The induced field (testing level:level 3, category C3) in accordance with EN/IEC 61800-3 | |
|---|---|---|
| standards | EN/IEC 61800-5-1 | |
| Product certification | THIS CSA asshole |
|
| degree of IP protection | IP20 | |
| vibration resistance | 3M4, amplitude=3 mm (f=9...200 test) in accordance with IEC 60721-3-3 | |
| Impact resistance | 10 gn, type I according to IEC 60721-3-3 | |
| relative humidity | 5...95% without condensation | |
| Ambient operating temperature | 0...55 °C | |
| ambient temperature during storage | -25...65 °C | |
| working height | <= 1000 м ( без derating ) > 1000...2000 m ( 1 % per 100 m derating ) |
Environmental friendliness of the offer
| Compliance with environmental status | A product of the Green Premium category | |
|---|---|---|
| RoHS Directive (date format: YYWW, 2 digits of the year and 2 digits of the week number) | Schneider Electric Declaration of Conformity | |
| REACh Regulations | The product does not contain particularly dangerous substances in quantities exceeding the norm. | |
| Environmental profile of the product | Disposal Guide | |
| Instructions for disposal of the product | Available |
Features
Brand
Schneider
No reviews yet — yours could be the first.
All reviews 0
Список отзывов пуст