Description
Features
Reviews
Main Features
| product series | Lexium 32 | |
|---|---|---|
| the type of device or its accessories | Motion control servo | |
| short name of the device | LXM32S | |
| the shape of the drive | Block | |
| number of network phases | Single-phase | |
| [Us] rated mains voltage | 100...120 V (- 15...10 %) 200...240 V (- 15...10 %) |
|
| supply voltage limits | 170...264 V 85...132 V |
|
| Power supply frequency | 50/60 Hz (- 5...5 %) | |
| network frequency | 47,5...63 Hz | |
| interference filter | Built-in | |
| Continuous output current | 3 A (f=8 kHz) | |
| Peak output current, 3 s | 6 A at 115 V for 5 s | |
| Continuous power | 300 W at 115 V | |
| Rated power | 0.3 kW at 115 V (f=8 kHz) | |
| linear current | 5.4 A, THDI of 159% at 115 V, Without throttle on line 5.2 A, THDI of 90% at 115 V, With an external throttle on the line from 2 MH 6.3 A, THDI of 107% at 230 V AC 50/60Hz, With an external throttle on the line from 2 MH |
Additional features
| Switching frequency | 8 kHz | |
|---|---|---|
| Overvoltage category | III | |
| leakage current | < 30 мА | |
| Output voltage | <= напряжение питания | |
| galvanic isolation | Between the power and control circuits | |
| cable type | IEC single core cable (for θ=50 °C) Conductor material: 90 °C copper ,wire insulation material: XLPE/EPR | |
| electrical connection | Clamp cable 3 mm2 AWG 12 (CN8) | |
| tightening torque | 0.5 N-m (CN8) | |
| number of digital inputs | 2 capture | |
| type of digital input | Capture (CAP) | |
| sample duration | 0.25 ms | |
| digital input voltage | 24 V post. Current to capture | |
| type of digital inputs | Positive (complement STO_A, complement STO_B) at State 0: < 5 В при Состоянии 1: > 15 V according to EN/IEC 61131-2 type 1 | |
| the time when the command was executed by the switch | <= 5 ms (дополнение STO_A, дополнение STO_B) | |
| number of digital outputs | 3 | |
| type of digital output | Logical (DO) 24 V post. current | |
| digital output voltage | <= 30 В пост. ток | |
| discrete output logic | Positive or negative (DO) according to EN/IEC 61131-2 | |
| contact rattle time | <= 1 мс (дополнение STO_A, дополнение STO_B) | |
| braking current | 50 mA | |
| output response time | 250 microseconds (DO) discrete | |
| protection function | STO (Safe torque shutdown), integrated | |
| security level | SIL 3 in accordance with EN/IEC 61508 | |
| communication interface | Integrated SERCOS III Integrated Modbus |
|
| connector type | RJ45 (marked CN7) :Modbus | |
| the physical interface | 2-wire Multipoint RS485 Modbus | |
| transfer rate | 9600, 19200, 38400 bps for long bus <= 40 м Modbus | |
| number of addresses | 1...247 Modbus | |
| LED status indicator | 1 LED (red) Servo voltage | |
| alarm function | Displaying failures in 7 segments | |
| marking | THIS | |
| working position | Vertical +/- 10 degrees | |
| Product compatibility | BMH servo motor (70 mm, 1 engine exhaust pipes) | |
| width | 68 mm | |
| height | 270 mm | |
| depth | 237 mm | |
| Product weight | 1.8 kg |
Operating conditions
| electromagnetic compatibility | Induced electromagnetic interference in accordance with EN 55011 class A group 1 | |
|---|---|---|
| standards | EN/IEC 61800-3 | |
| Product certification | CSA | |
| degree of IP protection | IP20 according to EN/IEC 60529 | |
| vibration resistance | 1 gn (f=13...150 Hz) in accordance with EN/IEC 60068-2-6 | |
| Impact resistance | 15 gn for 11 ms in accordance with EN/IEC 60028-2-27 | |
| degree of contamination | 2 in accordance with EN/IEC 61800-5-1 | |
| Environmental characteristics | Classes 3C1 according to IEC 60721-3-3 | |
| relative humidity | Class 3K3 (5 - 85%) without condensation in accordance with IEC 60721-3-3 | |
| Ambient operating temperature | 0...50 °C according to UL | |
| ambient temperature during storage | -25...70 °C | |
| type of cooling | Natural convection | |
| working height | <= 1000 м без ухудшения номинальных значений |
Features
Brand
Schneider
No reviews yet — yours could be the first.
All reviews 0
Список отзывов пуст