The installation code is ADE80TD-D1.0-110-0 /171 - ZBE 100 B 4-B050.
Output speed 8.5 rpm
Engine speed 1450 rpm
Power 3000 kW
The cyclic duration factor is 100%
IE Efficiency Class (this: 85,5 (100%); 86,4 (75%); 83,6 (50%))
The degree of protection of the motor is IP 54
Ambient temperature
gear motor -10 ... + 40 ° C
Installation height ≤ 1.000 m
Gear ratio 171.00
Terminal box location on top 0
The mounting position is horizontal
Total net weight approx. 253 kg
Electrical data:
Voltage D/Y 220/380 V
Frequency 50 Hz
Current D/Y12.00 /6.90 A
Technical data of the brake:
Braking torque 39.0 Nm
Voltage 171 V DC
Current 0.20 A
GE 380V AC Brake Rectifier
Equipment:
Insulation according to temperature class F
with phase isolation for inverter operation
Fan disk
GE Brake Rectifier
Low-noise design
Solid shaft with an involute slotted profile
Transmission with exhaust valve
Direct input
Regardless of the use of engine power or braking:With our Z cylindrical rotor motors, you benefit from our wide range of compelling advantages.
High engine power
- Engine power up to 45 kW
- Number of poles:2, 4, 6, 8
- Pole-shifting motors with two speeds
- ZBA/ZNA for movement tasks with a converter
- ZBF for moving tasks from the network
- ZBE/ZNE for long-term operation according to the energy coefficient class IE2
Configurable braking power
- Braking and non-braking
- The braking torque is projected from 0.9 to 680 Nm
- Optionally, two brake sizes for each engine size
- Braking motors with cylindrical rotor ZB and disc brake (held by spring force in a state without electric power)
- Precise braking torque scale due to the different number and strength of springs
- Various control units to meet the requirements for switching cycles