A single-stage centrifugal pump with a compact linear dry rotor with a flanged three-phase electric motor and a solid shaft or with an intermediate housing and a unified electric motor (version N) rigidly connected by means of a coupling. The IPL series is designed for installation in pipes or on foundations. Consoles are available as optional accessories. With a sliding mechanical seal independent of the direction of rotation in a casing with forced cooling and a synthetic impeller that reduces cavitation.
The flanges have holes R 1/8 for pressure measurement. A cataphoresis coating is applied to the pump housing and the intermediate housing.
Operational parameters
Pumped liquid: Water 100 %
Temperature of the pumped liquid: 20,00 °C
Expenditure:
Pressure:
Liquid temperature: -20...120 °C
Ambient temperature: -15...40 °C
Maximum operating pressure: 10 bar
Minimum Efficiency Index (MEI): ≥ 0,4
Electric motor data
Efficiency class of the electric motor: IE3
Connecting to the network: 3~400V/50 Hz
Voltage fluctuation tolerance: ±10 %
Rated power P2: 2,2 kW
Rated speed of rotation: 1450 1/min
Rated current: 4,7 A
Power factor: 0,84
Efficiency of the electric motor ηm 50 %: 85,5 %
Efficiency of the electric motor ηm 75 %: 87,0 %
Efficiency of the electric motor ηm 100 %: 0,8 %
Insulation heat resistance class: F
Protection class: IP55
Motor protection:
Materials
Pump housing: EN-GJL-250
The impeller: EN-GJL-200
Shaft: 1.4021
Shaft seal: AQ1EGG
Flashlight: EN-GJL-250
Installation dimensions
Connection to the pipeline on the suction side: DN 100, PN10
Connection to the pipeline from the pressure side: DN 100, PN10
Mounting length: 500 mm
Information about placing an order
The product: Wilo
Product designation: IPL 100/165-2,2/4 PN 10
Net weight approx.: 88,7 kg
Article number: 2121194