The PBC series of agitators presents vertical agitators driven directly by an electric motor and fastening. The agitator is designed for mixing, dispersing and circulation processes. These agitators are widely used in high-power and high-speed mixing processes in the food, cosmetic, pharmaceutical and chemical industries.
They are usually installed in small containers up to 1500 liters for working with low-viscosity products.
The principle of operation
Using a clamp stirrer it is installed on the tank wall, thanks to the hinge, the agitator can be installed with the required angle of inclination. The rotation of the propeller directs the product to the bottom of the container and then to the surface
along the wall of the tank opposite to the one on which the agitator is installed. The best result is achieved with a convex bottom.
Design and characteristics
Stirrer with attachment.
The lip seal.
Bearing support.
The propeller is fixed to the shaft and the shaft in turn is attached
to the auxiliary shaft with Allen pins. Electric motors according to IEC, design B14, 1500 rpm,
protection class IP55, F-class insulation.
Max. power 0.75 kW.
Lineflux propeller (Type 18).
Materials
Parts in contact with the medium: AISI 316L
Lip seal: NBR
Bearing Support: Aluminum
Options
The lip seal is made of FPM.
One-piece shaft.
Plastic shaft and propeller lining for operation
with corrosive media.
Welded propeller and surface treatment Ra ≤ 0.5 µm.
The casing of the electric motor.
Electric motors with additional protection.
Electric motors: 950 or 750 rpm.
A gear motor and a motovariator.
Pneumatic actuator.