Frequency converter E82MV152_4B001

Converter E82EV751K4C200

Advantages:

• Always the same, regardless of the standard sizes
• The 8200 vector frequency converter operates in the entire power range from 0.25 to 90 kW. Using vector control, the 8200 vector converter not only offers the best drive capabilities, but regardless of power, it is programmed the same way and contains the same functions.

This converter can be adapted to your individual requirements, as it is a modular system. And it is possible to select only the necessary equipment exclusively for your needs.

Drive capabilities:

• The power is 0.25 kW...7.5 kW 230 V/240 V (+10%) and 0.55 kW...90 kW 400 V/500 V (+10%)
• Overload capacity 180% of rated torque 60 seconds over 15 kW, additional 210% of rated torque 3 seconds
• Operating modes: V/f linear, V/f quadratic, vector control, sensorless torque control

Advantages

• Selecting incremental encoder settings;
• Communication with peripheral equipment via external plug-in modules - RS232/485 interfaces (LECOM A/B), fiber-optic communication (LECOM LI), as well as through other modules for common communication systems (CAN, PROFIBUS, INTERBUS, DeviceNet, CANopen);
• Protection against short circuit and ground fault in the load during operation;
• Adjustable motor current limitation, overcurrent information and emergency indication;
• Protection against overvoltage and undervoltage of the supply network;
• Overheating of the frequency converter with message output and emergency indication;
• Posistor (PTC) for monitoring engine overheating;
• Determination of the engine phase breakage;
• Built-in brake transistor in drives up to 11 kW;
• Built-in protection against radio interference;
• PID controller;
• Automatic control of the rotation speed of the electric motor;
• Compensation of sliding and motor supply voltage;
• Monitoring of load loss/belt breakage;
• Smooth S-shaped acceleration and braking characteristics to prevent jerks;
• Direct current braking;
• Motor potentiometer;
• 4 switchable sets of parameters that can be selected, including remotely;
• Control and operation from the XT keyboard module with a flat text display and structured menu;
• The function of copying the parameters of the inverter from the keyboard.