Omron U1000 AC Drives

Omron U1000 matrix frequency converters provide a four-quadrant operation mode with the recovery of braking energy back into the power supply network. Effective energy saving of this series allows you to significantly save on consumed resources. The entire range of standard sizes is equipped with built-in electromagnetic compatibility filters and is characterized by low harmonic distortion. Flexibility of switching solutions.

Practical sensorless control and also full control over the entire range using feedback sensors are used as a method for adjusting the speed of the shaft. This series is also characterized by improved capabilities for automatic configuration and adjustment, two load level mode options are used, and many functions are implemented for flexible and precise adjustment of the drive unit parameters.

Technical characteristics of Omron U1000 series converters

• Supply voltage: 3AC 200 - 240 V, 380 - 480 V;
• Input current (equal to or greater than nom. motor current): 10- 414 A;
• Output current: 8,7- 361 A;
• Management methods: scalar (volt-frequency), vector sensorless and using feedback sensors, vector for synchronous motors on permanent magnets (touch, sensorless standard and with advanced features);
• Output frequency: 0.01 - 400 Hz;
• Permissible overloads: the normal mode is up to 120% of the nom. current for 60 seconds, heavy duty - up to 150% of nom. current for 60 seconds, automatic shutdown when 200 is reached%;
• Enclosure protection class: IP00, IP20;
• Interfaces: RS-485/422, on request DeviceNet, PROFIBUS-DP, EtherCAT, PROFINET, EtherNet/IP, MECHATROLINK-II;
• Visualization and customization tools: control panel with LCD display, push-button navigation, software for control and parameterization using a personal computer;
• Other features and functions: auto tuning, 17 presets for speeds, acceleration/deceleration time adjustment, slip and torque compensation, PID controller, energy saving, auto restart, data backup, protective functions against power and temperature changes and others.

Omron U1000 I/O Configuration

• Analog: 3 inputs and 2 outputs;
• Digital: 8 inputs and 2 outputs;
• relay: 3 outputs.

Optional Omron U1000 drive modules

• An additional input/output card.
• A switching unit for connection to encoders.
• Network protocol modules.
• IP20 /Nema package.

Parameters of standard sizes of Omron U1000 electric drives

The supply voltage is 200 V

The supply voltage is 400 V

You can buy Omron U1000 series frequency converters, find out the price and more information about the products by contacting our specialists.