AC drive 890CD-531350B0-000-1A000

AC890 electric drives from Parker Hannifin are compact modular devices designed to control the speed and positioning of electric motors with closed and open circuits, in uniaxial and multiaxial mode. A wide range of feedback variations, optimal compatibility and flexibility in operation, as well as highly efficient sensorless vector control. High performance, minimal latency. In total, there are 4 operating modes, depending on the selected type of method of interaction with the electric motor.

They have the following electrical design options: 380-460 /500 V, three-phase, power 0.55 to 1200 kW and 220-240 V, 3-phase, power from 0.55 to 7.5 kW.

This range of frequency converters is represented by the following types of execution:

• modular design consisting of 2 modules with a common DC bus: AC890CS power supply module and AC890CD drive output module;
• the complete set of the drive in a single housing is AC890SD.

Technical characteristics of the AC890 electric drive

• Rated Power, kW/current:
  890CS: 7.5 kW/40 A - 90 kW/200 A;
  890CD: 0.75 kW/1.5 A - 110 kW/180 A;
  890CD: 0.55 kW/2 A - 900 kW/1681 A;
• Supply voltage ratings:
  890CS: ~3f. 208 - 500 V ±10%;
  890CD: 380 – 560/705 Per post. current;
  890SD: ~3f. 380 - 500V ±10%;
• Output frequency range: up to 1000 Hz in U/F mode;
• The maximum PWM frequency is up to 8 kHz (in Servo mode);
• Management methods: U/f characteristic in an open loop;
vector mode with and without speed feedback sensor, control of permanent magnet servo motors, recovery;
• TTL-6901/TTL/00 LCD control panel, 4 digits (standard for B-D dimensions);
• Graphical alphanumeric operator panel 6911/01/00/G (standard for E-K dimensions);
• DSE Lite Parameterization and Monitoring software;
• Pre-programmed macros of various applications;
• Built-in brake transistor;
• The ability to connect external EMC filters, network reactors, DC chokes, brake resistors.

Configuration of inputs/outputs of the AC890 electric drive

• 4 analog programmable inputs, 12 bits (2 inputs: ±10 V, 0-10 V, 0-20 mA, 4-20 mA;
2 inputs:±10 V, 0-10 V);
• 2 analog programmable outputs, 12 bits (±10 V, 0-10 V);
• 7 digital programmable inputs,=24 V;
• 2 digital programmable outputs,=24 V;
• 1 relay output, 4 A/~250 V or=24 V;
• 2 security entrances (STO).

Optional AC890 electric drive modules

Parameterization and parameter display modules:

• Full-featured HMI operator panel of the TS8000 series;
• Remote panel mounting kit 6901.

I/O expansion Module:

• 1 analog input ±10 V, 15 bits,
• 1 encoder input;

Feedback sensor connection modules:

• Incremental HTL Encoder 8902/EQ/00;
• Encoder with serial interface EnDat 2.1 (SinCos) 8902/M1/00;
• Resolver 8902/RE/00.

Modules of industrial communication protocols: Profibus-DP, Profinet IO, DeviceNet, ControlNet, CANopen, Ethernet IP, Modbus TCP, RS485, FireWire IEE1394, USB-порт

Protective (conformal) coating of printed circuit boards of the drive

Rated characteristics of the Parker Hannifin AC890 electric drive

You can buy Parker Hannifin AC890 frequency converters (electric drives), find out the price and more information about the product by contacting our specialists.