Multifunctional frequency converters (electric drives) Sinus H productions Santerno Elettronica designed to work with three-phase asynchronous and synchronous electric motors, three control algorithms are used - scalar (volt-frequency dependence), vector sensorless (without the use of feedback sensors) and its variation for permanent magnet motors.
The range of models is presented twelve dimensional dimensions and covers a range of capacities up to 37 kW, three options for the nominal value of the power supply network. Ultra compact architecture of the unit, silent operation, high level of safety of operation of the drive.
Remote control of the drive operation via the Internet with the REMOTE DRIVE software is provided, practical visualization of all operating data, saving settings, updating and other advantages in use.
Technical characteristics of the Santerno electric drive of the Sinus H series
- Electric motor power: 0.4 - 37 kW;
- Supply voltage: 200-240 В AC (1/3 фзы), 380-480 В AC (3 фзы);
- Overload capacity: 120 - 150% for 1 minute, 200% for 4 seconds;
- Output frequency range: 0 - 400 Hz;
- Management method: scalar, vector sensorless and vector sensorless for synchronous electric motors with permanent magnet excitation;
- Industrial interface: RS485, MODBUS RTU protocol;
- Indication: push-button control panel, 7-segment display, FWD/REV and SET/RUN LEDs, ;
- Operating temperature range: -10 ... +50 °C;
- Cooling system: forced ventilation;
- Protection class: IP20, IP66 (up to size 0030);
- Built-in functions: automatic determination of motor parameters, brake block (up to standard size 0030), potentiometer (frequency setting), speed measurement, 8 settings for fixing speeds, push mode, PID controller, emergency prevention algorithms, thermal safety, S-shaped acceleration and braking ramp, timers, EMC filter and others.
Optional units and additional equipment for Sinus H
- graphical control panel;
- платы для интерфейсов Profibus DP, CANopen, EtherCAT, Ethernet IP, TCP/IP bus, ProfiNET;
- the REMOTE DRIVE program.
Nominal characteristics of standard sizes of Santerno converters of the Sinus H series
Type of drive | heavy duty
| normal mode | Food | ||
Power, kW | Current, A | Power, kW | Current, A | ||
SINUS H 0001 2S BA1K2 | 0,4 | 1,0 | 0,75 | 1,2 | 200 - 240 V, Phase 1 |
SINUS H 0002 2S BA1K2 | 0,75 | 1,9 | 1,5 | 2,3 | |
SINUS H 0003 2S BA1K2 | 1,5 | 3,0 | 2,2 | 3,8 | |
SINUS H 0005 2S BA1K2 | 2,2 | 4,2 | 3,7 | 4,6 | |
SINUS H 0001 2T BIK2/6 | 0,4 | 2,5 | 0,75 | 3,1 | 200 - 240 V, 3 phases |
SINUS H 0002 2T BIK2/6 | 0,75 | 5,0 | 1,5 | 6,0 | |
SINUS H 0003 2T BIK2/6 | 1,5 | 8,0 | 2,2 | 9,6 | |
SINUS H 0005 2T BIK2/6 | 2,2 | 11,0 | 3,7 | 12,0 | |
SINUS H 0007 2T BIK2/6 | 4,0 | 17,0 | 5,5 | 18,0 | |
SINUS H 0011 2T BIK2/6 | 5,5 | 24,0 | 7,5 | 30,0 | |
SINUS H 0014 2T BIK2/6 | 7,5 | 32,0 | 11,0 | 40,0 | |
SINUS H 0017 2T BIK2/6 | 11,0 | 46,0 | 15,0 | 56,0 | |
SINUS H 0020 2T BIK2/6 | 15,0 | 60,0 | 18,5 | 69,0 | |
SINUS H 0001 4T BA1K2/6 | 0,4 | 1,0 | 0,75 | 1,5 | 380 - 480 V, 3 phases |
SINUS H 0002 4T BA1K2/6 | 0,75 | 1,9 | 1,5 | 2,4 | |
SINUS H 0003 4T BA1K2/6 | 1,5 | 3,0 | 2,2 | 3,9 | |
SINUS H 0005 4T BA1K2/6 | 2,2 | 4,2 | 3,7 | 5,3 | |
SINUS H 0007 4T BA2K2/6 | 4,0 | 6,5 | 5,5 | 7,6 | |
SINUS H 0011 4T BA2K2/6 | 5,5 | 9,1 | 7,5 | 12,2 | |
SINUS H 0014 4T BA2K2/6 | 7,5 | 12,2 | 11,0 | 17,5 | |
SINUS H 0017 4T BA2K2/6 | 11,0 | 18,3 | 15,0 | 22,9 | |
SINUS H 0020 4T BA2K2/6 | 15,0 | 22,9 | 18,5 | 29,0 | |
SINUS H 0025 4T BA2K2/6 | 18,5 | 29,7 | 22,0 | 33,5 | |
SINUS H 0030 4T BA2K2/6 | 22,0 | 34,3 | 30,0 | 44,2 | |
SINUS H 0030 4T XA2K2 | 30,0 | 61,0 | 37,0 | 75,0 |
To buy Sinus H frequency converters (electric drives) from Santerno Elettronica, you can find out the price and more information about the product by contacting our specialists.
