Siemens Sinamics G130 AC drives

Powerful embedded converters SINAMICS G130 They offer the consumer a wide range of performance characteristics and additional components to optimize the drive system for individual production tasks. Three asynchronous motor control modes are implemented in the range from 75 to 800 kW The sensorless vector method is characterized by the highest accuracy rates, which eliminates the need for a feedback sensor for most applications.

Innovative technical solutions allow SINAMICS G130 to have a compact mechanical design and a low noise level in operation. For ease of handling, they are equipped with control panels of basic and advanced functionality. The use of these converters has gained particular popularity in the following industrial installations: pumps, compressors, ventilation systems, extruders, mixers, milling machines, etc.

Technical characteristics of the SINAMICS G130 electric drive

• Rated power: 75 - 800 kW;
• Rated supply voltage: 3rd and 380 - 480 /500 - 600 /660 - 690 JPG;
• The laws of management: scalar, vector control with speed feedback sensor and sensorless;
• Output frequency range: 0 - 300 Hz;
• Overload possibilities: 110% of the nom values. current for 60 seconds or 150% for 10 seconds;
• 15 fixed programmable speeds + 1 minimum speed;
• Built-in RS-232 port, PROFIBUS-DP interface, additional slot for connection of optional communication cards;
• Built-in security features (STO, ST1);
• Degree of protection: IP00 or IP20 depending on the type;

Configuration of inputs/outputs of the SINAMICS G130 electric drive

• 12 digital programmable inputs + 8 bidirectional digital inputs/outputs,=24 V;
• 2 switchable relay outputs (=30 V /max. 0.5 A – ohmic load);
• 4 DRIVE-CLiQ sockets;
• input for connecting an electric motor thermistor (RTS, KTY84);

Optional SINAMICS G130 electric drive modules

• Parameterization and parameter display modules:
- BOP20 – basic operator console (2-line backlit display + 6 programming buttons);
- AOP30 – remote control with graphic LCD screen for the operator + RS-232 cable for connection to the control module;
• I/O expansion Modules:
- TB30 – 4 digital inputs + 4 digital outputs + 2 analog inputs + 2 analog outputs;
- TM31 – 8 digital inputs + 4 bidirectional digital inputs + 2 analog inputs + 2 analog outputs + 2 relay outputs with switching contacts + 1 thermistor input + 2 DRIVE-CLiQ sockets;
• Feedback sensor connection modules: SMC30 – for working with encoders (incremental TTL/HTL, SSI with/without TTL/HTL incremental signals);
• Industrial communication protocol modules: CANopen, PROFIBUS-DP;
• Brake module + brake resistors;
• From the network side: reactors, harmonic surge protectors;
• On the load side: reactors, sinusoidal, dv/dt filters + FLS (peak voltage limiters).

Nominal characteristics of standard sizes of frequency converters of the Sinamics G130 series

Supply voltage 380 - 400 V, 3 phases AC

Supply voltage 500 - 600 V, 3 phases AC

Supply voltage 660 - 690 V, 3 phases AC

You can buy Siemens Sinamics G130 series frequency converters on favorable terms, find out the price and more information about the product by contacting our specialists.