Siemens Sinamics V20 AC Drives

A series of frequency converters Sinamics V20 It is represented by a collection of models made in 7 dimensions for capacities up to 30 kW. An ideal offer for undemanding production plants with simple sequential actions, which ensures the highest quality of work in a very economical and easy-to-handle technical design. To monitor the use of electricity, there is a visualization of its actual consumption, as well as other functionality for working in energy saving mode.

Electric drives of this series are mainly used for operation in the system of electric drive equipment of the following types: pumps (centrifugal), compressors, fans (radial and axial), conveyor systems (belts, roller, chain, etc.), single drives of mills, mixers, agitators, centrifuges, crushers, main drives of textile machines, machinery on cable manufacturing and other applications.

Technical characteristics of the SINAMICS V20 electric drive

• Rated power of the electric motor: 0.12 - 30 kW;
• Rated voltage of the power supply network: 1 phase AC 200 - 240 In / 3 phases AC 380 - 480 V;
• The laws of management: scalar, linear, quadratic and programmable dependence, by flow coupling (FCC);
• Output frequency range: 0 - 599 Hz;
• Overload possibilities: 150% of the nom values. current for 60 seconds, 10 min cycle;
• Built-in electromagnetic compatibility filter;
• Interfaces: RS 232 with USS protocol, Modbus RTU;
• Functions: PID process controller, BICO function, shock start mode, additional acceleration mode, pump flushing function, cascading motors, flexible gain control, wobble, slip compensation, two parameterizable acceleration ramps, configurable PWM;

Configuration of inputs/outputs of the SINAMICS V20 electric drive

• 2 analog inputs (AI1: bipolar, mA/V; AI2: unipolar, mA/V);
• Analog output (0 - 20mA);
• 4 digital inputs (optical isolation, NPN/PNP);
• 2 digital outputs (1 relay output and 1 transistor: DC 30 V, 0.5A (ohmic load) and 250 V AC 0.5A (ohmic load);

Optional SINAMICS V20 electric drive modules

• Parameterization and parameter display modules:
- BOP20 – basic control panel (2-line backlit display + 6 programming buttons);
• Brake block + brake resistors;
• Flash Memory Card (SD);
• Input and output chokes.

Nominal characteristics of standard sizes of frequency converters of the Sinamics V20 series

Power supply voltage 200 - 240 V AC, 1 phase

Mains voltage 380 - 480 V AC, 3 phases

You can buy Siemens Sinamics V20 series frequency converters on favorable terms, find out the price and more information about the product by contacting our specialists.