Sprint Electric 3600XRi DC Drives

Sprint Electric 3600XRi DC Drives they are made in an open design, without a case. The model functions in 4-quadrant mode, power supply single-phase It is characterized by a fast response in control at all speeds in two directions of shaft movement (reversible). The energy accumulated during braking is returned back to the supply network through the use of technology for its Direct recovery This makes the engine operation process even more economical and does not require the use of expensive braking resistors.

The model range is represented by five standard size options with a power of up to 36 amperes, the entire control The electronics are isolated from high voltage. It is suitable for controlling motors with parallel excitation (shunt) or with permanent magnets. Feedback on the voltage level of the motor armature, as well as for deeper and more accurate adjustment, signals from installed tachogenerators are used.

Technical Characteristics of Sprint Electric 3600XRi DC Drives:

• Rated current: 4 - 36 A;
• Rated voltage: 90 /180 /320 In;
• Power: 0.55 – 9.5 kW;
• Mains voltage: 100 – 440 V;
• Connectors: analog and digital inputs/outputs (compatible with programmable logic controllers);
• Terminals: screw;
• Push-button reverse switch;
• Push-button start function;
• Low speed operation function;
• The ability to control the torque of the engine;
• Field winding current: up to 2 A;
• Overload: 150 % for 30 seconds;
• Dimensions (H x W x D): 175 x 200 x 70 mm.

User Settings

• The maximum speed is within 40 - 200 V ;
• the minimum speed is within 0 - 50 % of the maximum ;
• acceleration and deceleration, forward and reverse ;
• maximum current values ;
• IR compensation ;
• stability.

Rated characteristics of Sprint Electric 3600XRi electric drive models:

You can buy direct current drives from Sprint Electric 3600XRi series, find out the price or more detailed information about this category of products by contacting our specialists.