P6104 Rubber compensator PN16 EPDM Tmax=+90oC flanged

P6104 Rubber compensator PN16 EPDM Tmax=+90oC flanged

Rubber expansion joints are installed on cooling systems , heating and ventilation at various levels factories and enterprises, nuclear power plants and ships,

and they are also used in urban systems. water supply and sewerage , water treatment and water treatment plants, at the pumps, turbines and boilers for

compensation for large temperature movements, elimination of oscillation, vibration and noise, acquisitions water hammer

1. Rubber compensator.

2. Body – EPDM with reinforcement, Flanges – carbon steel

3.Flanged connection PN10/16 according to GOST 12820-80

4.Maximum operating pressure PN16

5. Operating temperature -10°C +90°C (under pressure PN8.8 before +110°C)

The flanged rubber compensator is designed for water supply systems, heat supply, and various technological equipment.

Maximum operating values: Temp. Min.: - 20 °C; temp. Max.: + 110 °C                                               

32                     95              140            100            4-18
40                     95              150            110            4-18
50                    105             165            125            4-18
65                    115             185            145            4-18
80                    130             200            160            8-18
100                  135             220            180            8-18
125                  165             250            210            8-18
150                  180             285            240            8-22
200                  205             340            295            8-22
250                  240             395            350           12-22
300                  260             445            400           12-22
350                  255             505            460           16-22
400                  255             565            515           16-26
450                  255             615            565           20-26
500                  255             670            620           20-26
600                  255             780            725           20-30

Maintenance and repair.

It should be borne in mind that the service life of compensators is limited and depends on pressure, temperature, environmental conditions, ozone exposure, number of cycles, compatibility of materials, range of motion and proper fastening. Compensators are designed in such a way that they do not require periodic lubrication and maintenance. However, periodic inspections help extend the life of the equipment and reduce installation/removal problems.:

• check all fasteners and threaded connections for loosening and oxidation. In case of leakage, tighten as needed;
• if the leak has not been eliminated, check the contact points of the surfaces of the compensator and the pipeline, if necessary, replace the damaged parts;
• In case of excessive deformation or corrosion, the compensator should be completely replaced.

In case of damage to the rotator cuff, the compensator should be completely replaced.