Description
Features
Reviews
Main Features
| product series | Zelio Control | |
|---|---|---|
| the type of device or its accessories | Modular measurement and control relays | |
| type of relay | Control relay | |
| number of network phases | 3 phases | |
| Name of the relay | RM22TG | |
| parameters controlled by the relay | Phase break detection The order of phase alternation |
|
| type of delay | Without | |
| switching capacity, V·A | 2000 V·A | |
| Measuring range | 183...528 V AC voltage |
Additional features
| reset time | <= 1500 мс при максимальном напряжении | |
|---|---|---|
| max. switching voltage | 250 In the lane . current | |
| minimum switching current | 10 mA at 5 V post. current | |
| max. switching current | 8 A alternating current | |
| [Us] rated mains voltage | 208...480 test3 lane current | |
| supply voltage limits | 183...528 In the lane . current | |
| voltage limits of the control circuit | 183...528 V alternating current | |
| power consumption, VA | 15 V·A at 480 test3 alternating current 60 Hz | |
| voltage detection threshold | < 100 V переменный ток | |
| Power supply frequency | 50...60 Hz +/- 10 % | |
| output contacts | 2 Switching. | |
| start delay after power on | <= 650 мс | |
| the time when the command was executed by the switch | <= 200 мс | |
| Overvoltage category | III in accordance with UL 508 III in accordance with IEC 60664-1 |
|
| insulation resistance | > 100 mOhm at 500 V DC according to IEC 60255-27 | |
| mounting position | Any position | |
| accessions | Screw clamps 2 x 0.5...2 x 2.5 mm2 - AWG 20...AWG 14, hard cable cable without tip Screw clamps 2 x 0.2...2 x 1.5 mm2 - AWG 24...AWG 16, flexible cable with cable tip Screw clamps 1 x 0.5...1 x 3.3 mm2 - AWG 20...AWG 12, hard cable cable without tip Screw clamps 1 x 0.2...1 x 2.5 mm2 - AWG 24...AWG 14, flexible cable with cable tip |
|
| tightening torque | 0.6...1 N-m in accordance with IEC 60947-1 | |
| housing material | Self-extinguishing plastic | |
| LED status indicator | The LED is yellow for the ON relay The LED is green for the power on |
|
| mounting support | DIN rail 35 mm in accordance with EN/IEC 60715 | |
| electrical wear resistance | 100,000 cycles | |
| mechanical wear resistance | 10000000 cycles | |
| Application category | AC-1 according to IEC 60947-4-1 DC-1 according to IEC 60947-4-1 AC-15 in accordance with IEC 60947-5-1 DC-13 in accordance with IEC 60947-5-1 |
|
| safety and reliability data | MTTFd=924.6 years B10d=850000 |
|
| contact material | Does not contain cadmium | |
| width | 22.5 mm | |
| Product weight | 0.09 kg |
Operating conditions
| resistance to short-term loss of supply voltage | <= 10 мс | |
|---|---|---|
| electromagnetic compatibility | Induced and radiated interference Class B according to CISPR 22 Durability in residential buildings, commercial buildings and small industrial enterprises in accordance with EN/IEC 61000-6-1 Electrostatic discharge 6 kV level 3 contact discharge according to IEC 61000-4-2 Electrostatic discharge 8 kV level 3 air discharge according to IEC 61000-4-2 RF interference resistance test 10 V/m level 3 in accordance with IEC 61000-4-3 Immunity test for switching interference/short 4 kV packets level 4 direct in accordance with IEC 61000-4-4 Immunity test for switching interference/short packets 2 kV level 4 capacitive coupling in accordance with IEC 61000-4-4 4 kV pulse interference immunity test level 4 general mode according to IEC 61000-4-5 Pulse immunity test 2 kV level 4 differential. mode according to IEC 61000-4-5 Induced and radiated interference Class B Group 1 according to CISPR 11 Standard radiation for industrial environments in accordance with EN/IEC 61000-6-4 Standard. radiation for residential, commercial and small industrial premises in accordance with EN/IEC 61000-6-3 Resistance to the industrial environment in accordance with EN/IEC 61000-6-2 |
|
| standards | EN/IEC 60255-1 | |
| Product certification | CCC THIS CSA GL EAC China RoHS |
|
| ambient temperature during storage | -40...70 °C | |
| Ambient operating temperature | -20...50 °C at 60 Hz -20...60 °C at 50 Hz per./post. current |
|
| relative humidity | 93...97% at 25...55 °C in accordance with IEC 60068-2-30 | |
| vibration resistance | 0,075 мм (f=10...58.1 Гц) (not in operation) в соответствии с IEC 60068-2-6 1 gn (f=10...58.1 Гц) (not in operation) в соответствии с IEC 60068-2-6 0.035 mm (f=58.1...150 Hz) (in operating mode) in accordance with IEC 60068-2-6 0.5 gn (f=58.1...150 Hz) (in operating mode) in accordance with IEC 60068-2-6 |
|
| Impact resistance | 15 gn для 11 мс (not in operation) в соответствии с IEC 60068-2-27 5 gn for 11 ms (in operating mode) according to IEC 60068-2-27 |
|
| degree of IP protection | IP20 in clamps according to IEC 60529 IP40 in the enclosure in accordance with IEC 60529 IP50 V front panel according to IEC 60529 |
|
| degree of contamination | 3 in accordance with IEC 60664-1 3 in accordance with UL 508 |
|
| Insulation test voltage | 2.5 test1 for 1 min. alternating current 50 Hz according to IEC 60255-27 |
Features
Brand
Schneider
No reviews yet — yours could be the first.
All reviews 0
Список отзывов пуст