Tachogenerator Baumer Huebner Hubner

In industrial enterprises, the brand Baumer Hubner It is primarily associated by technical specialists and engineers with reliable measuring systems involved in feedback loops when controlling DC and AC electric machines. Baumer Hubner is one of the European leaders in the production of feedback sensors for determining the speed of rotation, the position of the rotating shaft, tracking the length of movement – these are optical, magnetic, absolute and incremental encoders, DC and AC tachogenerators.
A distinctive feature of this electrical equipment is its high reliability, initially the equipment was designed for heavy duty in metallurgy and the extractive industry, and later it was introduced into other industries. If we compare Huebner equipment with equipment from other manufacturers, then we can say that the "margin of safety" - the time to failure of this equipment is much higher than that of other equipment on the market.
Currently, the production of feedback sensors is carried out in the following areas:
- tachogenerators (DC generators that allow you to control the speed and direction of rotation of the shaft of an electric motor or rotating assembly, due to the resulting output voltage, the value of which is proportional to the speed of rotation);
incremental encoders (electronic devices that determine the speed of rotation of the shaft of various mechanisms);
-absolute encoders (electronic devices that allow you to control the position of the shaft, including when the power is off);
- encoders with sine output /resolvers (electronic sensors that allow you to control the rotation speed and position of the shaft by generating output sinusoidal signals);
- explosion-proof encoders.
The Baumer Huebner feedback sensors can be adapted to operate in a wide temperature range from -50°C to +130°C, have increased vibration resistance and impact resistance.
Baumer Hubner electronic feedback sensors are installed on electric motors, DC and AC electric machines manufactured by ABB, Siemens, Baumuller, Lenze, Cantoni, Ansaldo, AEG, VEM, WEG, Leroy Somer, SEW Eurodrive, Sicme Motori.
Most of the T-T Electric DC and AC motors supplied by our company are equipped with encoders and tachogenerators from this manufacturer.
You can buy a Baumer Huebner tachogenerator, buy a Baumer Hubner encoder in our company, regarding the selection of tachogenerators, encoders, please contact our specialists by phone.: saluteh or e-mail: saluteh.

List of electronic feedback sensors supplied by Saluteh LLC
Тахогенератор постоянного тока Baumer Huebner TDP 0,2 LT /TDPZ 0,2 LT
The steepness of the output voltage at 1000 rpm: 10, 20, 30, 40, 50, 60, 100, 150 In;
Maximum speed: 10000 rpm;
Number of output channels: single channel /dual channel;
Temperature coefficient: 0.05%/°C;
Operating temperature: -30..+130°C;
Protection class: IP55 /IP56;
Mounting version: IMB10, IMB14, IMB3;
Mounting flange dimensions: 85x100 mm;
Shaft Diameter: 7 /11 /14 mm; Weight: 2.6 kg;
Альтернативное название: TDP 0,2 LT-6, TDP 0,2 LT-7, TDP 0,2 LT-10, TDP 0,2 LT-5, TDP 0,2 LT-4, TDP 0,2 LT-3, TDP 0,2 LT-1, TDPZ 0,2 LT-7, TDPZ 0,2 LT-5, TDPZ 0,2 LT-4, TDPZ 0,2 LT-3.

Baumer Hubner GT 3 DC tachogenerator (hollow shaft)
Output voltage steepness at 1000 rpm: 5V;
Maximum speed: 10000 rpm;
Number of output channels: single channel;
Temperature coefficient: 0.035%/°C;
Operating temperature: -30..+130°C;
Protection class: IP00 /IP54;
Mounting version: IMB5;
Case diameter: 34 mm;
Shaft diameter: 6mm;
Rotor weight: ~ 20g;
Alternative name: GT 3.10 L/405, GT3.

Baumer Huebner GT 5 /GTL 5 DC tachogenerator (hollow shaft)
Output voltage steepness at 1000 rpm: 7, 9.5, 10 V;
Maximum speed: 10000 rpm;
Number of output channels: single channel;
Temperature coefficient: 0.05%/°C;
Operating temperature: -30..+130°C;
Protection class: IP00 /IP44;
Mounting version: IMB5;
Case diameter: 52 mm;
Shaft diameter: 8.12mm;
Rotor weight: ~50g;
Alternative name:GT 5.05 L /407, GT 5.05 L /409, GT 5.05 L /410, GT5, GTL5.

Baumer Huebner GT 7 /GTF 7 DC tachogenerator (hollow shaft)
The steepness of the output voltage at 1000 rpm: 10, 20 ,30 ,40 ,50, 60 In;
Maximum speed: 9000 rpm;
Number of output channels: single channel;
Temperature coefficient: 0.005%/°C;
Operating temperature: -30..+130°C;
Protection class: IP55;
Mounting version: IMB5;
Case diameter: 70 mm;
Shaft Diameter: 12 /14 /15 /16 mm;
Rotor weight: ~110.160g;
Alternative name: GT 7.08 L /410, GT 7.08 L /420, GT 7.08 L /430, GT 7.16 L /440, GT 7.16 L /460, GT7, GTF7.

Baumer Huebner GT 9 DC tachogenerator (with hollow shaft)
The steepness of the output voltage at 1000 rpm: 10, 20 V;
Maximum speed: 9000 rpm;
Number of output channels: single channel;
Temperature coefficient: 0.05%/°C;
Operating temperature: -30..+130°C;
Protection class: IP00 /IP44;
Mounting version: IMB5;
Case diameter: 90 mm;
Shaft Diameter: 12 /16 /17 mm;
Rotor weight: ~155g;
Alternative name: GT 9.06 L /410, GT 9.06 L /420, GT9.

Baumer Huebner GTB 9 DC tachogenerator (with hollow shaft)
The steepness of the output voltage at 1000 rpm: 10, 20 V;
Maximum speed: 9000 rpm;
Number of output channels: single channel;
Temperature coefficient: 0.05%/°C;
Operating temperature: -30..+130°C;
Protection class: IP68;
Mounting version: IMB5;
Case diameter: 95 mm;
Shaft Diameter: 12 /16 /17 mm;
Rotor weight: ~155g;
Alternative name: GT 9.06 L /410, GT 9.06 L /420, GTB9.

Baumer Hubner GTR 9 DC tachogenerator (hollow shaft)
The steepness of the output voltage at 1000 rpm: 10, 20, 30, 40, 50, 60 In;
Maximum speed: 9000 rpm;
Number of output channels: single channel;
Temperature coefficient: 0.05%/°C;
Operating temperature: -30..+130°C;
Protection class: IP56;
Mounting version: IMB5;
Case diameter: 95 mm;
Shaft diameter: 16 mm;
Rotor weight: ~ 490g;
Альтернативное название: GTR 9.16 L /410, GTR 9.16 L /420, GTR 9.16 L /430, GTR 9.16 L /440, GTR 9.16 L /450, GTR 9.16 L /460.

Baumer Hubner TDP 0.03 DC tachogenerator (cylindrical shaft)
Output voltage steepness at 1000 rpm: 7.20 V;
Maximum speed: 12000 rpm;
Number of output channels: single channel /dual channel;
Temperature coefficient: 0.02%/°C;
Operating temperature: -30..+130°C;
Protection class: IP44;
Mounting version: IMB5;
Flange diameter: 44 mm;
Shaft diameter: 4.73mm;
Weight: ~230g;
Alternative name: TDP 0.031 L, TDP 0.032 L, TDP0.03.

Baumer Huebner DC Tachogenerator TDP 0.09 /TDPZ 0.09
The steepness of the output voltage at 1000 rpm: 10, 20, 30, 40, 50, 60 In;
Maximum speed: 10000 rpm;
Number of output channels: single channel /dual channel;
Temperature coefficient: 0.05%/°C;
Operating temperature: -30..+130°C;
Protection class: IP56;
Mounting version: IMB5;
Flange diameter: 85mm;
Shaft diameter: 6mm;
Weight: 1.2 kg;
Альтернативное название: TDP 0,09 LT-1, TDP 0,09 LT-2, TDP 0,09 LT-7, TDP 0,09 LT-3, TDP 0,09 LT-8, TDP 0,09 LT-9, TDPZ 0,09 LT-1, TDPZ 0,09 LT-2, TDPZ 0,09 LT-3.

Baumer Huebner DC Tachogenerator TDP 0.2 LS
Output voltage steepness at 1000 rpm: 60 V;
Maximum speed: 10000 rpm;
Number of output channels: single channel /dual channel;
Temperature coefficient: 0.005%/°C;
Operating temperature: -30..+130°C;
Protection class: IP55;
Mounting version: IMB10;
Mounting flange size: 85x100 mm;
Shaft size: 11x30mm;
Weight: 2.4 kg;
Альтернативное название: TDP 0,2 LS-6, TDP 0,2 LS-7, TDP 0,2 LS-10, TDP 0,2 LS-5, TDP 0,2 LS-4, TDP 0,2 LS-3, TDP 0,2 LS-1.

Baumer Hubner GMP 1.0 /GMPZ 1.0 DC Tachogenerator
Output voltage steepness at 1000 rpm: 40, 65, 100, 175 V;
Maximum speed: 6000 rpm;
Number of output channels: dual channel;
Temperature coefficient: 0.005%/°C;
Operating temperature: -30..+130°C;
Protection class: IP55;
Mounting version: IMB5 /IMB3, IMB14;
Mounting flange size: 85x100 mm;
Shaft diameter: 12 /14mm;
Weight: 4.5 kg;
Альтернативное название: GMP 1,0LT-10, GMP 1,0LT-7, GMP 1,0LT-4, GMP 1,0LT-1, GMPZ 1,0LT-10, GMPZ 1,0LT-7, GMPZ 1,0LT-4, GMPZ 1,0LT-1.

Baumer Huebner TDP 13 /TDPZ 13 DC Tachogenerator
The steepness of the output voltage at 1000 rpm: 20, 65, 100, 175, 200 In;
Maximum speed: 6000 rpm;
Number of output channels: single channel /dual channel;
Temperature coefficient: 0.05%/°C
Operating temperature: -30..+130°C;
Protection class: IP55;
Mounting version: IMB5 /IMB3, IMB10, IMB14;
Mounting flange size: 80x100 /110x140/130x155 mm;
Shaft Diameter: 14 /18 /20 /32 mm;
Weight: 8.5 kg;
Альтернативное название: TDP 13.06LT-15, TDP 13.06LT-17, TDP 13.06LT-6, TDP 13.06LT-3, TDP 13.06LT-2, TDPZ 13.06LT-15, TDPZ 13.06LT-17, TDPZ 13.06LT-6, TDPZ 13.06LT-3, TDPZ 13.06LT-2.

Baumer Huebner OG 6 Incremental Optical Encoder
Number of pulses per rpm: 100, 200, 360, 500, 512;
Maximum speed: 12000 rpm;
Maximum output frequency: 120kHz;
Output signal level: HTL, TTL;
Output signals: A+,A-, B+,B-,Z+,Z-;
Output signals: Push-pull (T) /RS422(S);
Supply voltage: 9-26V /5V DC;
Maximum load current: 100 mA;
Shaft diameter: 6mm;
Mounting flange size: 42x50 mm;
Protection class: IP54; Operating temperature: -20..+70°C.

Baumer Huebner OG 60 Incremental Optical Encoder
Number of pulses per rpm: 200, 360, 512, 600, 720, 900, 1000, 1024, 1250, 1500, 1800, 2000, 2048, 2500, 3600, 4000, 4096, 5000, 10000;
Maximum speed: 12000 rpm;
Maximum output frequency: 250kHz;
Output signal level: HTL, TTL;
Output signals: A+,A-, B+,B-,Z+,Z-;
Output signals: Push-pull (T) /RS422(S);
Supply voltage: 9-26V /5V DC;
Maximum load current: 100 mA;
Shaft diameter: 6mm;
Mounting flange diameter: 58 mm;
Protection class: IP65; Operating temperature: -30..+85°C.

Baumer Huebner HOG 60 incremental optical encoder (hollow shaft)
Number of pulses per rpm: 200, 360, 512, 600, 720, 900, 1000, 1024, 1250, 1500, 1800, 2000, 2048, 2500, 3600, 4000, 4096, 5000, 10000;
Maximum speed: 12000 rpm;
Maximum output frequency: 250kHz;
Output signal level: HTL, TTL;
Output signals: A+,A-, B+,B-,Z+,Z-;
Output signals: Push-pull (T) /RS422(S);
Supply voltage: 9-26V /5V DC;
Maximum load current: 100 mA;
Shaft diameter: 8,10,12mm;
Protection class: IP65; Operating temperature: -30..+85°C.

Baumer Huebner OG 70 Incremental optical Encoder
Number of pulses per rpm: 50, 200, 360, 512, 600, 720, 900, 1000, 1024, 1250, 1500, 1800, 2000, 2048, 2500, 3600, 4000, 4096, 5000, 10000;
Maximum speed: 10000 rpm;
Maximum output frequency: 250kHz;
Output signal level: HTL, TTL;
Output signals: A+,A-, B+,B-,Z+,Z-;
Output signals: Push-pull (T) /RS422(S);
Supply voltage: 9-26V /5V DC;
Maximum load current: 100 mA;
Shaft diameter: 6mm;
Mounting flange size: 58 mm;
Protection class: IP66; Operating temperature: -20..+85°C.

Baumer Huebner HOG 70 incremental optical encoder (with hollow shaft)
Number of pulses per rpm: 50, 200, 360, 512, 600, 720, 900, 1000, 1024, 1250, 1500, 1800, 2000, 2048, 2500, 3600, 4000, 4096, 5000, 10000;
Maximum speed: 10000 rpm;
Maximum output frequency: 250kHz;
Output signal level: HTL, TTL;
Output signals: A+,A-, B+,B-,Z+,Z-;
Output signals: Push-pull (T) /RS422(S);
Supply voltage: 9-26V /5V DC;
Maximum load current: 100 mA;
Shaft Diameter: 8 /10 /12 /14 mm;
Protection class: IP66; Operating temperature: -20..+85°C.

Baumer Huebner OG 71 Incremental optical encoder
Number of pulses per rpm: 100, 200, 256, 360, 400, 500, 512, 720, 1000, 1024;
Maximum speed: 10000 rpm;
Maximum output frequency: 120kHz;
Output signal level: HTL, TTL;
Output signals: A+,A-, B+,B-,Z+,Z-;
Output signals: Push-pull (T) /RS422(S);
Supply voltage: 9-26V /5V DC;
Maximum load current: 100 mA;
Shaft diameter: 6mm;
Mounting flange size: 58 mm;
Protection class: IP66; Operating temperature: -20..+85°C.

Baumer Hubner HOG 71 Incremental Optical encoder
Number of pulses per rpm: 64, 100, 180, 192, 200, 256, 360, 400, 500, 512, 720, 1000, 1024, 2048;
Maximum speed: 10000 rpm;
Maximum output frequency: 120kHz;
Output signal level: HTL, TTL;
Output signals: A+,A-, B+,B-,Z+,Z-;
Output signals: Push-pull (T) /RS422(S);
Supply voltage: 9-26V /5V DC;
Maximum load current: 100 mA;
Shaft diameter:12 /14 mm;
Protection class: IP66; Operating temperature: -20..+85°C.

Baumer Hubner OG 8 Incremental Optical Encoder
Number of pulses per rpm: up to 2500;
Maximum speed: 12000 rpm;
Maximum output frequency: 120kHz;
Output signal level: HTL, TTL;
Output signals: A+,A-, B+,B-,Z+,Z-;
Output signals: Push-pull (T) /RS422(S);
Supply voltage: 9-26V /5V DC;
Maximum load current: 100 mA;
Shaft diameter: 11x30 mm;
Mounting flange size: 85x100 mm;
Protection class: IP54; Operating temperature: -30..+85°C.

Baumer Huebner HOG 8 Incremental optical encoder (hollow shaft)
Number of pulses per rpm: up to 2500;
Maximum speed: 12000 rpm;
Maximum output frequency: 120kHz;
Output signal level: HTL, TTL;
Output signals: A+,A-, B+,B-,Z+,Z-;
Output signals: Push-pull (T) /RS422(S);
Supply voltage: 9-26V /5V DC;
Maximum load current: 100 mA;
Shaft diameter:16mm;
Protection class: IP54; Operating temperature: -30..+85°C.

Baumer Thalheim OG 9 Incremental optical encoder
Number of pulses per rpm: up to 1250;
Maximum speed: 12000 rpm;
Maximum output frequency: 120kHz;
Output signal level: HTL, TTL;
Output signals: A+,A-, B+,B-,Z+,Z-;
Output signals: Push-pull (T) /RS422(S);
Supply voltage: 9-30V /5V DC;
Maximum load current: 100 mA;
Shaft diameter: 11x30 mm;
Mounting flange size: 85x100 mm;
Protection class: IP55; Operating temperature: -30..+100°C.

Baumer Thalheim HOG 9 Incremental Optical Encoder
Number of pulses per rpm: up to 2500;
Maximum speed: 10000 rpm;
Maximum output frequency: 120kHz;
Output signal level: HTL, TTL;
Output signals: A+,A-, B+,B-,Z+,Z-;
Output signals: Push-pull (T) /RS422(S);
Supply voltage: 9-30V /5V DC;
Maximum load current: 100 mA;
Shaft diameter:12 /16 /17 mm;
Protection class: IP56; Operating temperature: -30..+100°C.

Baumer Hubner OG 90 Incremental Optical Encoder
Number of pulses per rpm: 1000, 1024, 1500, 2000, 2048, 2500, 3600, 4096, 5000, 10000;
Maximum speed: 12000 rpm;
Maximum output frequency: 250kHz;
Output signal level: HTL, TTL;
Output signals: A+,A-, B+,B-,Z+,Z-;
Output signals: Push-pull (T) /RS422(S);
Supply voltage: 9-26V /5V DC;
Maximum load current: 100 mA;
Shaft diameter: 11x30 mm;
Mounting flange size: 85x100 mm;
Protection class: IP55; Operating temperature: -30..+85°C.

Baumer Huebner HOG 10 /HOG 10 G Incremental Optical Encoder
Number of pulses per rpm: up to 2500;
Maximum speed: 6000 rpm;
Maximum output frequency: 120kHz;
Output signal level: HTL, TTL;
Output signals: A+,A-, B+,B-,Z+,Z-;
Output signals: Push-pull (T) /RS422(S);
Supply voltage: 9-30V /5V DC;
Maximum load current: 100 mA;
Shaft diameter: 17 /20mm (hollow shaft);
Protection class: IP66;
Operating temperature: -40 +100°C.

Baumer Thalheim HOG 11 /HOG 11 G Incremental Optical Encoder
Number of pulses per rpm: up to 2500;
Maximum speed: 6000 rpm;
Maximum output frequency: 120kHz;
Output signal level: HTL, TTL;
Output signals: A+,A-, B+,B-,Z+,Z-;
Output signals: Push-pull (T) /RS422(S);
Supply voltage: 9-30V /5V DC;
Maximum load current: 100 mA;
Shaft diameter: 16 /17mm (hollow shaft);
Protection class: IP67; Operating temperature: -30..+100°C.

Baumer Huebner HOG 12 Incremental Optical Encoder
Number of pulses per rpm: 600, 1024;
Maximum speed: 6000 rpm;
Maximum output frequency: 120kHz;
Output signal level: HTL, TTL;
Output signals: A+,A-, B+,B-,Z+,Z-;
Output signals: Push-pull (T) /RS422(S);
Supply voltage: 9-26V /5V DC;
Maximum load current: 100 mA;
Shaft diameter: 38 /45mm (hollow shaft);
Protection class: IP54; Operating temperature: -30..+85°C.

Baumer Thalheim HOG 16 Incremental Optical Encoder
Number of pulses per rpm: 250, 500, 512, 600, 1000, 1024, 1080, 1200, 2048, 2500;
Maximum speed: 6000 rpm;
Maximum output frequency: 120kHz;
Output signal level: HTL, TTL;
Output signals: A+,A-, B+,B-,Z+,Z-;
Output signals: Push-pull (T) /RS422(S);
Supply voltage: 9-30V /5V DC;
Maximum load current: 100 mA;
Shaft Diameter: 25 /28 /35/38 mm 9 (hollow shaft);
Degree of protection: IP66; Operating temperature: -30..+100°C.

Baumer Huebner HOG 22 /HOG 220 Incremental Optical Encoder
Number of pulses per rpm: 720, 1024, 1800, 4000;
Maximum speed: 3800 rpm;
Maximum output frequency: 120kHz;
Output signal level: HTL, TTL;
Output signals: A+,A-, B+,B-,Z+,Z-;
Output signals: Push-pull (T) /RS422(S);
Supply voltage: 9-30V /5V DC;
Maximum load current: 100 mA;
Shaft diameter: 110 mm (hollow shaft);
Degree of protection: IP56 /IP54; Operating temperature: -30..+100°C.

Baumer Hubner HOG 75 /HOG 75 K Incremental Optical Encoder
Number of pulses per rpm: 250, 256, 500, 512, 1024, 1200, 1250, 2048, 2500;
Maximum speed: 10000 rpm;
Maximum output frequency: 120kHz;
Output signal level: HTL, TTL;
Output signals: A+,A-, B+,B-,Z+,Z-;
Output signals: Push-pull (T) /RS422(S);
Supply voltage: 9-26V /5V DC;
Maximum load current: 100 mA;
Shaft diameter: 17 /26mm (hollow shaft);
Protection class: IP56; Operating temperature: -30..+85°C.

Baumer Huebner HOG 100 Incremental Optical Encoder
Number of pulses per rpm: 1024, 2000, 2048, 2160, 2400, 2500, 3072, 4096, 5000, 10000;
Maximum speed: 10000 rpm;
Maximum output frequency: 250kHz;
Output signal level: HTL, TTL;
Output signals: A+,A-, B+,B-,Z+,Z-;
Output signals: Push-pull (T) /RS422(S);
Supply voltage: 9-30V /5V DC;
Maximum load current: 100 mA;
Shaft diameter: 16 /17mm (hollow shaft);
Protection class: IP66; Operating temperature: -30..+85°C.

Baumer Huebner HOG 131 Incremental Optical Encoder
Number of pulses per rpm: 1024, 2048, 3072;
Maximum speed: 6000 rpm;
Maximum output frequency: 250kHz;
Output signal level: HTL, TTL;
Output signals: A+,A-, B+,B-,Z+,Z-;
Output signals: Push-pull (T) /RS422(S);
Supply voltage: 9-30V /5V DC;
Maximum load current: 100 mA;
Shaft diameter: 38mm (hollow shaft) ;
Degree of protection: IP56; Operating temperature: -40..+100°C.

Baumer Hubner HOG 161 Incremental Optical Encoder
Number of pulses per rpm: 250, 500, 512, 600, 1000, 1024, 1080, 2048;
Maximum speed: 6000 rpm;
Maximum output frequency: 120kHz;
Output signal level: HTL, TTL;
Output signals: A+,A-, B+,B-,Z+,Z-;
Output signals: Push-pull (T) /RS422(S);
Supply voltage: 9-26V /5V DC;
Maximum load current: 100 mA;
Shaft diameter: 38 /40 /42 /56 /57 /60 /65 /70 mm;
Degree of protection: IP54; Operating temperature: -20..+85°C.

Baumer Huebner HOG 163 Incremental Optical Encoder
Number of pulses per rpm: 250, 500, 512, 600, 1000, 1024, 1080, 2048, 4096, 5000;
Maximum speed: 6000 rpm;
Maximum output frequency: 120kHz;
Output signal level: HTL, TTL;
Output signals: A+,A-, B+,B-,Z+,Z-;
Output signals: Push-pull (T) /RS422(S);
Supply voltage: 9-26V /5V DC;
Maximum load current: 100 mA;
Shaft diameter: 38 /40 /42 /55 /56 /57 /60 /65 /70 /75 mm;
Degree of protection: IP56; Operating temperature: -30..+85°C.

Baumer Hubner HOG 165 Incremental Optical Encoder
Number of pulses per rpm: 250, 500, 512, 600, 1000, 1024, 1080, 1200, 2048, 2500, 4096, 5000;
Maximum speed: 6000 rpm;
Maximum output frequency: 120kHz;
Output signal level: HTL, TTL;
Output signals: A+,A-, B+,B-,Z+,Z-;
Output signals: Push-pull (T) /RS422(S);
Supply voltage: 9-30V /5V DC;
Maximum load current: 100 mA;
Shaft diameter: 38mm (hollow shaft);
Protection class: IP67; Operating temperature: -30..+100°C.

Baumer Hubner HG 6 Incremental Optical Encoder
Number of pulses per rpm: 100, 200, 360, 500, 512;
Maximum speed: 12000 rpm;
Maximum output frequency: 120kHz;
Output signal level: HTL, TTL;
Output signals: A+,A-, B+,B-,Z+,Z-;
Output signals: Push-pull (T) /RS422(S);
Supply voltage: 9-26V /5V DC;
Maximum load current: 100 mA;
Shaft diameter: 12 /16mm (hollow shaft);
Degree of protection: IP55; Operating temperature: -20..+85°C.

Baumer Hubner HG 16 Incremental Optical Encoder
Number of pulses per rpm: 250, 500, 512, 600, 1000, 1024, 1080, 1200, 2048;
Maximum speed: 12000 rpm;
Maximum output frequency: 120kHz;
Output signal level: HTL, TTL;
Output signals: A+,A-, B+,B-,Z+,Z-;
Output signals: Push-pull (T) /RS422(S);
Supply voltage: 9-30V /5V DC;
Maximum load current: 100 mA;
Shaft diameter: 20..45 mm (hollow shaft);
Degree of protection: IP56; Operating temperature: -30..+85°C.

Baumer Hubner HG 18 Incremental Optical Encoder
Number of pulses per rpm: 250, 500, 512, 600, 1000, 1024, 1080, 1200, 2048, 2500;
Maximum speed: 10000 rpm;
Maximum output frequency: 120kHz;
Output signal level: HTL, TTL;
Output signals: A+,A-, B+,B-,Z+,Z-;
Output signals: Push-pull (T) /RS422(S);
Supply voltage: 9-26V /5V DC;
Maximum load current: 100 mA;
Shaft diameter: 65..85mm (hollow shaft);
Degree of protection: IP54; Operating temperature: -30..+70°C.

Baumer Hubner HG 22 Incremental Optical Encoder
Number of pulses per rpm: 720, 1800, 4000;
Maximum speed: 10000 rpm;
Maximum output frequency: 120kHz;
Output signal level: HTL, TTL;
Output signals: A+,A-, B+,B-,Z+,Z-;
Output signals: Push-pull (T) /RS422(S);
Supply voltage: 9-26 V /5V DC;
Maximum load current: 100 mA;
Shaft Diameter: 90 /100 /110 mm (hollow shaft);
Degree of protection: IP44; Operating temperature: -30..+70°C.

Baumer Hubner HG 21 Incremental Optical Encoder
Number of pulses per rpm: up to 2500;
Maximum speed: 12000 rpm;
Maximum output frequency: 160 kHz;
Output signal level: HTL, TTL;
Output signals: A+,A-, B+,B-,Z+,Z-;
Output signals: Push-pull (T) /RS422(S);
Supply voltage: 9-26 V /5V DC;
Maximum load current: 100 mA;
Shaft diameter: 95mm (hollow shaft);
Protection class: IP44; Operating temperature: -30..+70°C.

Baumer Huebner POG 9 /POG 9 G Incremental Optical Encoder
Number of pulses per rpm: up to 2500;
Maximum speed: 12000 rpm;
Maximum output frequency: 120kHz;
Output signal level: HTL, TTL;
Output signals: A+,A-, B+,B-,Z+,Z-;
Output signals: Push-pull (T) /RS422(S);
Supply voltage: 9-26 V /5V DC;
Maximum load current: 100 mA;
Shaft diameter: 11x30 mm;
Degree of protection: IP56; Operating temperature: -30..+100°C.

Baumer Hubner Incremental Optical Encoder POG 10 /POG 10 G
Number of pulses per rpm: up to 2500;
Maximum speed: 12000 rpm;
Maximum output frequency: 120kHz;
Output signal level: HTL, TTL;
Output signals: A+,A-, B+,B-,Z+,Z-;
Output signals: Push-pull (T) /RS422(S);
Supply voltage: 9-30 V /5V DC;
Maximum load current: 100 mA;
Shaft diameter: 11x30 mm;
Degree of protection: IP66; Operating temperature: -40..+100°C.

Baumer Huebner POG 11 /POG 11 G Incremental Optical Encoder
Number of pulses per rpm: 1, 2, 3, 4, 5, 6, 8, 10, 11, 12, 15, 16, 20, 25, 30, 40, 50, 60, 62, 64, 72, 80, 100, 120, 128, 180, 192, 200, 250, 256, 300, 360, 400, 500, 512, 600, 720, 900, 1000, 1024, 2048, 2500;
Maximum speed: 10000 rpm;
Maximum output frequency: 120kHz;
Output signal level: HTL, TTL;
Output signals: A+,A-, B+,B-,Z+,Z-;
Output signals: Push-pull (T) /RS422(S);
Supply voltage: 9-30 V /5V DC;
Maximum load current: 100 mA;
Shaft diameter: 11x30 mm;
Degree of protection: IP67; Operating temperature: -30..+100°C.

Baumer Hubner POG 90 Incremental Optical Encoder
Number of pulses per rpm: 1024, 2000, 2048, 2400, 2500, 3072, 3600, 4096, 5000, 10000;
Maximum speed: 10000 rpm;
Maximum output frequency: 250kHz;
Output signal level: HTL, TTL;
Output signals: A+,A-, B+,B-,Z+,Z-;
Output signals: Push-pull (T) /RS422(S);
Supply voltage: 9-30V /5V DC;
Maximum load current: 100 mA;
Shaft diameter: 11x30 mm;
Protection class: IP56; Operating temperature: -20..+85°C.

Baumer Huebner AHE 7 /AFE 7 Incremental Optical Encoder
Number of pulses per rpm: 60, 64, 100, 128, 176, 180, 192, 200, 256, 360, 400, 500, 512, 600, 720, 1000, 2048, 2500, 5000;
Maximum speed: 10000 rpm;
Maximum output frequency: 120kHz;
Output signal level: HTL, TTL;
Output signals: A+,A-, B+,B-,Z+,Z-;
Output signals: Push-pull (T) /RS422(S);
Supply voltage: 9-26 V/5V DC;
Maximum load current: 100 mA;
Shaft Diameter: 0.55";
Degree of protection: IP56; Operating temperature: -30..+70°C.

Baumer Huebner EGZ 14 /AG 14 Incremental Optical Encoder
Number of pulses per rpm: 250, 500, 1024, 2048, 2500;
Maximum speed: 3500 rpm;
Maximum output frequency: 120kHz;
Output signal level: HTL, TTL;
Output signals: A+,A-, B+,B-,Z+,Z-;
Output signals: Push-pull (T) /RS422(S);
Supply voltage: 9-30 V /5V DC;
Maximum load current: 100 mA;
Shaft diameter: 70 mm;
Protection class: IP20 /IP54; Operating temperature: -20..+85°C.

Baumer Huebner HML 131 M Incremental Optical Encoder
Number of pulses per rpm: 128, 256, 1024, 2048;
Maximum speed: 2800 rpm;
Maximum output frequency: 95.5 kHz;
Output signal level: HTL, TTL;
Output signals: A+,A-, B+,B-,Z+,Z-;
Output signals: Push-pull (T) /RS422(S);
Supply voltage: 9-30 V /5V DC;
Maximum load current: 100 mA;
Shaft diameter: 36 mm;
Protection class: IP68; Operating temperature: -20..+90°C.