The iTHERM TM411 meets all the requirements for measuring equipment in the food and pharmaceutical industries. The wetted parts of the thermometer are made of 316L stainless steel with a high degree of surface polishing, the device has a wide range of available hygienic process connections. Significantly reduce maintenance costs and increase the efficiency of temperature measurement thanks to innovative device options: QuickSens, StrongSens and QuickNeck.
Specifications:
Principle of measuring Thermoresistor Characteristics /Application Metric design
modular system for temperature measurement
hygienic/aseptic design (3-A®, EHEDG, ASME BPE, FDA)
hygienic connections to the process
with a neck
Suitable for hazardous areas
with a protective tube
QuickSens with the shortest response time
StrongSens for the most durable construction
QuickNeck for easy and cost-effective calibration
Pin connector A30A — E+H, aluminum —low cover, hinged — with or without display
TA30D — E+H, aluminum — high, hinged lid
TA30R-- stainless steel with treatment — screw cap — with or without display
TA30R — stainless steel with hand polishing — screw cap — with or without display
TA30S — polypropylene screw cap
TA30P — polyamide — high, hinged lid
Thermowell /protective tube welded protective sleeve
without a protective sleeve
tee and corner element
Insert/sensing element in mineral insulation (MI), flexible.
tubular design, insulated wires, not flexible.
The outer diameter of the protective tube is 6.0 mm (0.24")
9.0mm (0.35")
12.7mm (0.5")
Material of the protective tube/thermowell1.4435, delta ferrite content < 1%
316L
Joining the press fitting process
welded adapter
clamping devices according to ISO2852
milk nut according to DIN 11851
aseptic milk nut according to DIN 11864-1
metal sealing system
threaded connection. correspondingly. ISO 228 for Liquiphant Adapter
APV Inline
Varivent
Ingold
SMS 1147
Neumo Biocontrol
tee and corner elements
The shape of the sensor tip is straight
truncated
narrowed
Surface roughness Ra0.76 microns (29.92 microns)
0.38 microns (14.96 microns)
0.38 microns (14.96 microns) with electronic polishing
The working range of HT100:
-200 °C … 600 °C
(-328 °F … 1.112 °F)
StrongSens:
-50 °C … 500 °C
(-58 °F … 932 °F)
QuickSens:
-50 °C … 200 °C
(-58 °F … 392 °F)
Max. working pressure (static)at 20 °C: 40 bar (580 lb/sq. inch)
Error Class A according to IEC 60751
Class AA according to IEC 60751
The response time depends on the configuration
QuickSens: t90=1.5 s
StrongSens: t90=9.5 s
Built-in normalizing converter (4 ... 20 mA; HART; PROFIBUS PA; FOUNDATION FIELDBUS)
Explosion protection certificates for TECH II
ATEX IECEx
FM
NEPSI
Explosion protection Oil (converter only)