Series SieiDrive TPD32 EV Thyristor electric drives from the company GEFRAN This is a high-tech line of digital DC electric drives with a wide range of nominal values (control of motors with a capacity of up to 5 MW). They are designed to equip modern industrial automation systems for production operations and meet the most stringent requirements for reliability and safety in operation.
A wide range of built-in functions, including auto-parameterization, quick start, various user-programmable modules and other tools that allow you to configure the engine operation as accurately and easily as possible, the models use a two-quadrant or four-quadrant control system, as well as a 12-pulse parallel and serial configuration system.
The series is available in three variants of constructive and functional design: standard line TPD32 EV (7 body sizes + bridge design), compact control modules TPD32 EV-CU (up to 70 A) and a special converter for inductive loads TPD32 EV-FC (up to 650 A).
Technical characteristics of the Gefran TPD32 EV electric drive
- Rated current: 20 - 3300 A;
- Voltage: 3 x (230 - 500) V, (230 - 575) In, 3 x (230 - 690) In;
- Speed control via reverse communication via tachogenerator and/or encoder (sinusoidal or digital);
- Digital input/output algorithm control (PNP, NPN);
- Built-in excitation controller for the entire range;
- LED Diagnostic Module;
- Protection by the integral of the square of excess current (I2t);
- Industrial interface: RS485 (Modbus RTU protocol);
- Support for industrial networks: ProfibusDP, DeviceNet, CANopen;
- Operating temperature range: 0 - 40 °C, above with power reduction (up to 50 °C);
- Protection class IP00, IP20;
- Built-in functions: quick start, auto-tuning, programming of multi-ramps, linear and S-shaped, 7 presets for multi-speeds, separate speed level adjustment for each direction of rotation, software overload control, reverse, setting current limits for the appropriate speed, PID lock, smooth acceleration, restart on the go, step-down function and others.
Configuration of inputs/outputs of the Gefran TPD32 EV electric drive
- 3 analog inputs ± 10 V (0..4-20 mA);
- 2 analog outputs (± 10 V);
- 8 digital inputs (4 pre-configured + programmable);
- 4 fiber-optic digital outputs;
- 2 inputs for working with encoders (digital, sinusoidal);
- input for connecting the tachogenerator;
- 2 relay outputs;
- input for the motor thermistor.
Optional Gefran TPD32 EV electric drive modules
Programmable KB panel.The board for expansion of inputs /outputs TBO-32.
Interface: Profibus, DeviceNet, CANopen.
APC200d programmable card.
Additional management of DEII encoders.
RS485 for direct communication with a PC.
Dedicated EMC filters (according to EN61800-3).
Input and output choke (standardized).
Remote control for Gefran TPD32 EV Thyristor converters
You can buy Gefran TPD32 EV DC digital converters, find out the price and more information about the product by contacting our specialists.