Vacuum liquid ring pumps of the series SEEN from the company Pumping bacon They are applicable in a wide range of technological operations requiring pumping out the gas medium and creating a vacuum in the system, they are very economical and reliable in operation. They have a single-stage configuration, with valves (depending on the size), a practical modular structure. The suction and supply pipes are located radially relative to the axis of rotation, for large standard sizes (from 500th), the supply is out sideways. Certified according to the ATEX standard (II 1G/2G and II 2G/2GD).
Cast iron or stainless steel are used as the structural materials of the pump body, the impeller can be made of corrosion-resistant steel or red bronze. The shaft is made of steel grade 1.4122 or 1.4571 and sealed with a mechanical (mechanical) seal. The water supply valves are made of fluoroplast-4. The drive unit consists of highly efficient three-phase electric motors with surface cooling and protection against penetration of water and dust.
Pumped medium: non-aggressive vapours and gases.
Working fluids: water.
Areas of application: food, chemical and pharmaceutical industries, medical technologies, plastic production and processing.
Technical characteristics of Speck Pumpen VU Series liquid Ring vacuum pumps
- Volume consumption: up to 1550 m3/hour;
- Inlet pressure: up to 150 mbar;
- Working fluid temperature: up to 80 °C;
- The temperature of the pumped gas: up to 100 °C /up to 200 °C (dry /saturated);
- Installation: horizontal, on the base plate.
Standard sizes of Speck Pumpen pumps of the VU series
FROM0020, FROM0040, FROM0080, FROM0140, FROM0220, FROM0300, FROM0450, FROM0500, FROM0600, FROM0800, FROM1200, FROM1600, FROM0351, FROM0451
You can buy Speck Pumpen VU series liquid ring vacuum pumps, find out the price and more information about the products by contacting our specialists.
