Vibrator pad 18218203 60001/min

BRECON external vibrator 18218203 60001/min

BRECON high frequency external vibrators are the right choice for wet casting seals and special requirements.

BRECON high-frequency vibrators generate amplitudes from 6,000 revolutions per minute. for standard wet casting applications and up to 9,000-12,000. for specific requirements such as, for example, in large concrete structures.

Wet cast concrete is only reinforced at frequencies from 4,500 to 6,000 rpm with proper quality. Only the correct frequency guarantees perfect sealing without the risk of disaggregation. With a variable drive, it is possible to determine the optimal frequency where concrete is combined in the shortest possible time and with maximum density.

The ideal frequency for each mixture can be adjusted by frequency converters, which are necessary for the operation of high-frequency vibrators. The highest quality can be achieved with our synchronous external vibrators.

In our catalog you will find an overview of our standard external vibrators, accessories and control equipment.

The main competence of BRECON high-frequency vibrators.

The powerful cast concrete industry worldwide knows BRECON for its intelligent vibration products and injection molding lubrication solutions. We combine economic efficiency and technology that offers our customers the achievement of their goals in the field of product quality and production flexibility.

This results in high concrete strength and high-quality concrete surfaces. Forms and formwork designed for vibration are a prerequisite for optimal and uniform introduction of vibrations into concrete. Due to the small fluctuations of the vibrations of high-frequency vibrators, fractures and welds of the weld are excluded. Vibrators mutually affect each other only slightly, even if they are located at a short distance from each other. Resonant phenomena and amplitude increases are minimized, vibrations can easily penetrate the insulation layers.

With many years of experience in the use of external vibrations, BRECON has the necessary know-how to equip any production plant with the right vibrators. Of course, it is also part of the maintenance service of the council regarding the correct location of the vibrator and additional accessories such as frequency converters and radio-controlled junction boxes for the rational operation of the installation. This applies not only to large-size formwork, but also to all forms in which concrete must be rationally compacted, to pipes, manhole rings and ladders or vibration stations of carousel production.

Brecon site vibrators are three-phase motors used for conveyor equipment, compaction of building mixes and transportation of bulk materials. The rotation frequency is from 500 to 3600 rpm with a power range from 0.4 to 223.6 kN.

When connected to a power source, it does not require the use of a frequency converter or manual control. The case is completely protected from dust and moisture, which corresponds to the degree of protection IP65. Fluctuations are generated due to the displacement of the center of gravity by eccentric loads.

TECHNICAL CHARACTERISTICS OF BRECON VIBRATORS

• Centrifugal force: from 0.4 to 223.6 kN;
• Rotation frequency: 500-3600 rpm;
• Static moment: from 0.8 to 5920 kg*mm;
• Power: 0.07-19 kW;
• Voltage: 220-240/380-415 V, 380-405/660-700 V, 3 phases;
• Current: 0.15-31 A;
• Degree of protection: IP65.

TECHNICAL CHARACTERISTICS OF BRECON VIBRATORS

• Centrifugal force: from 0.4 to 223.6 kN;
• Rotation frequency: 500-3600 rpm;
• Static moment: from 0.8 to 5920 kg*mm;
• Power: 0.07-19 kW;
• Voltage: 220-240/380-415 V, 380-405/660-700 V, 3 phases;
• Current: 0.15-31 A;
• Degree of protection: IP65.